Spec Tech Industrial
Back to B/W Controls

Buy Your Industrial Control Products Here!

B W Controls

Level Measurement

Continuous Level Measurement - 7230 HT Digital Probe

Measure Condensate, Oil and Water, and other Mixed-Liquid Tanks.

• No Calibration Required
• Provides Total Level, Interface Level and up to 5 Temperatures
• Independent of Changes in Process Material’s Electrical Characteristics and Densities
• Modbus RTU, and Proprietary ASCII Digital Protocols Available
• High Temperature Applications
• Temperature Range to 257ºF
• High Accuracy of 0.01%

The 7230 Series HT Digital Probe is a magnetostrictive probe for high temperature applications in the oil and gas industry including pipeline tanks and oil and water separators. The level sensor provides a multi-variable output that includes level, interface and temperature data that only requires one process connection.

There are two communication protocols available. The 7231 with Modbus RTU is the standard protocol. The 7235 comes with a proprietary, ASCII protocol and is recommended for OEM applications. An optional Analog interface is also available.

What is impressive about this instrument is that the measurements are completely independent of changes in the process material’s electrical characteristics and densities. Hydrocarbon based condensates have a predictable range of specific gravity that are well within the range of the standard floats, which means that variations in hydrocarbon make up will not cause level measurement errors. In addition, the measurements are not affected by vapors, stratification, or temperature changes. This makes the 7230 Series probe ideal for applications where liquids with different physical characteristics are mixed in one tank such as condensate and separator tanks.


Continuous Level Measurement - 7330 Pro-Stik II

Pro-Stik II - Intrinsically Safe Programmable Linear Position Sensor
The Series 7330 Pro-Stik II supersedes the 7220 and 7300. This product combines the reliability and resolution of magnetostrictive continuous absolute positioning sensing with the Stik package to create a unique level measuring instrument.
The magnetostrictive technology is the same as used in Gemco LDT sensors. Ametek liquid level sensors, have been proven in demanding applications such as underground leak detection and inventory management. The 7330 is available with a rigid 316 stainless steel or flexible PVDF materials.

The 7330 also is available in an explosion/flame proof design. The 7330 EX/ED Series Pro-Stik II takes field proven magnetostrictive sensing technology and incorporates features such as explosion/flame proof design and field programmable span. This is packaged in our patented Stik design, making the Pro-Stik II ideal for level monitoring in a variety of liquids and tanks.


6012
Downloads
6012 Catalog

Point Level Conductivity - 6012 Electrode Holders

Electrode Holders Series 6012

B/W Controls offers a variety of electrode holders to meet mounting, pressure, and temperature requirements. Most holders have watertight protection for conduit or cable entrance.  Ametek offers holders and electrodes in many different materials for the most corrosive or high temperature applications.

Electrodes and holders should be selected according to the specific characteristics of the liquid involved, the lengths required to obtain the desired control of levels, and the physical nature of the container. Because of these factors, the B/W line of electrodes and holders presented in this section has been developed to provide a practical, economical solution to almost every conceivable application and installation problem. When necessary, special equipment can also be supplied to meet specific needs.


6013
Downloads
6013 Catalog

Point Level Conductivity - 6013 Electrodes Sensors

Electrodes Sensors Series 6013 

The B/W electrode sensors are available in several varieties: solid rod (rigid), wire suspension, and standard gland plugs for high vibration applications.  In addition, we offer custom options made per customer’s requirements.  Electrodes made from 316SS, Brass, Monel, Nickel, Carpenter 20, Hastelloy B, Hastelloy C, and Titanium provide compatibility for almost all applications and environments.  We cover the sewage pumping stations, elevated tanks, shallow and deep wells, hydropneumatic tank, storm drain type, cooling towers and many more applications.

Electrodes and holders should be selected according to the specific characteristics of the liquid involved, the lengths required to obtain the desired control of levels, and the physical nature of the container. Because of these factors, the B/W line of electrodes and holders presented in this section has been developed to provide a practical, economical solution to almost every conceivable application and installation problem. When necessary, special equipment can also be supplied to meet specific needs.


7010
Downloads
7010 Catalog

Point Level Floats - 7010 Tilt Switch Float Assemblies

7010 Tilt Switch Float Assemblies- The B/W Controls Float Switches are tilt actuated liquid level controls, designed to operate pumps, valves, multiple alternators, relays, contactors, alarms and similar equipment for industrial and commercial use.  The wide angle, tilt-option uses a mechanical switch inside the float, while a hermetically sealed, axially nonposition-sensitive mercury switch is the narrow angle option.  These floats provide a reliable, long-lasting level control suitable for most liquid environments up to 160 F.   

The B/W Tilt Float Switch provides an ideal pilot device for the control of all B/W relays and controls panels.  The polypropylene float, PVC cable, and hermetically sealed mercury switch provide an economical liquid level solution for controlling sewage, effluent, many chemical solutions, as well as liquids in other hostile environments containing oil, grease or other similar industrial and municipal wastes where dependable liquid control is essential.


Point Level Floats - 7014 Unifloat Level Float Sensors

7014 Unifloat  - The B/W Unifloat level sensing system was developed especially to permit simple, low-cost installation and ease of adjustment in service for a broad range of applications requiring accurate multiple function/multiple level control of any type of liquid.   The unique design of the patented Unifloat features a Latching Reed Switch that eliminates the need for multiple floats to indicate various switch points. 

The B/W Unifloat Assembly is available in two styles: one lead with grounded contact or two leads with isolated contact.  Both offer a latching reed switch for greater flexibility and can be used with all the B/W control relays and control panels.  The isolated contact design can directly interface to programmable controllers.


OEM Product Continuous Level Measurement - 7100 Leak Detect Stik

Leak Detect Stik - The 7100 Stik Liquid Level Sensor takes field proven magnetostrictive sensing technology and packages it in a revolutionary new way for greater reliability and for easy installation and mounting.                                                                                                            
All sensor electronics are SMT components integrated into the 5/8” diameter sensing tube. This breakthrough in package design eliminates the bulky electronics enclosure at the top of the sensor and offers you greater options for insertion.

The 7100 Stik has PPM (Pulse Position Modulated) outputs for product and interface level and for temperature measurement, which are all superimposed on the two wire power line. All units are Intrinsically Safe and approved for use in hazardous locations.


7250

OEM Product Continuous Level Measurement - 7250 Digital Stik

Digital Stik - The 7250 Digital Stiks take field proven magnetostrictive sensing technology and packages it for greater reliability and easier installation. It is ideal for liquid level monitoring, interface level and leak detection in a variety of liquid media in above ground and underground storage tanks. This series has an inherently lower cost design which results in savings. It provides the same performance and reliability as sensors that consume more power.

The 7250X Digital Stik is constructed of 316 Stainless Steel and comes with a variety of connectors, including a mini connector for quick connect applications, a single 3/4” NPT that can be used with a compression fitting, a double 3/4” NPT for mounting with a flange or bushing, and a 1/2” right angle for use in low overhead applications.

Updated on April 12, 2016 9:19 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com