Spec Tech Industrial
Back to Dongan

Buy Your Industrial Control Products Here!

Dongan

Single Phase Dry-Type Transformers


Single Phase Ventilated:Dongan Single Phase Ventilated
Series 35: .050 kVA - .750 kVA - Series 80: 1.0 kVA - 5.0 kVA

UL Listed, File E3210
CSA Listed, File LR 560

Double wound isolation-type transformer

Copper windings and copper lead wire terminations used throughout.

NEMA-3R, wall mount enclosure suitable for indoor or outdoor use. May be used in banks of 2 or 3 units for standard three phase voltages and nonstandard, open delta auto-transformer applications. (Note: .050 kVA - .100 kVA are in a NEMA-1 enclosure)


Dongan Single Phase Ventilated Catalog Pages

Single Phase Encapsulated:Dongan Single Phase Encapsulated
Series 85 ISO-Shield: .250 kVA - 25 kVA

UL Listed, File E3210, .250 - 10 kVA
UL Listed, File E78234, 15 - 25 kVA

Double wound isolation-type transformer
Copper windings and copper lead wire terminations used throughout.
Electrostatic shield between primary and secondary windings provides cleaner output voltage and helps to reduce spikes and transients.

Epoxy-silica encapsulated core and coil provides a transformer particularly well suited for harsh commercial and industrial applications.

NEMA-3R, wall mount enclosure suitable for indoor or outdoor use. May be used in banks of 2 or 3 units for standard three phase voltages and nonstandard, open delta autotransformer applications.


Dongan Single Phase Encapsulated Catalog Pages

Dongan Single Phase Cabinet Style
Single Phase Cabinet Style
Series 61 ISO-Shield: 7.5 kVA - 100 kVA

UL Listed, File E78234
CUL Listed through UL File E3210

Double wound, isolation type transformers
Aluminum windings connect to bus bar style terminations equipped with NEMA standard holes for compression style or ring terminals
NEMA-3R, ventilated, cabinet style, floor mount enclosure suitable for indoor or outdoor use. No extra rainshields required for outdoor use. May also be used in banks of 2 or 3 units for three phase isolation or autotransformer applications
Electrostatic shield between primary and secondary windings provides cleaner output voltage and helps to reduce spikes and transients.

Vibration dampening pads provide quiet operation
Wall Mounting brackets are available in sizes up to 50 kVA
Core and coil and nonstandard designs are available by consulting the factory, your Dongan distributor or your Dongan representative.

Primary Secondary
240 X 480 120 / 240
240 X 480 120 - Fused
480 120 / 240
208 120 / 240
277 120 / 240
600 120 / 240
120 / 240 120 / 240
120 / 240 12 / 24
120 / 240 16 / 32
240 / 480 24 / 48

Dongan Single Phase Cabinet Style Catalog Pages


CE Marked  Single Phase Encapsulated
Series ES - 11 .250 kVA - 25 kVA

Series ES Single Phase Encapsulated Transformers are designed to comply with Domestic, North American, and European Union electrical and testing standards. Series ES are UL and Canadian UL Listed by Underwriters Labs. In addition, Series ES are CE Marked, and licensed by the German testing agency TÜVRheinland under License Number R 2679035.01.

Series ES transformers are the answer to your export needs. With the voltage combinations listed below, and built In approvals, the ES Series provide no-nonsense solutions for equipment destined for the European Community of nations.

Under EC guidelines, connecting transformers to line end load require finger safe connections. While other manufacturers provide leads, Dongan provides finger safe terminals on all ES- 11 transformers. This feature eliminates the necessity of a difficult, labor intensive installation of terminals in the wiring compartment by the end user.

The voltage combinations offered represent some of the most universally used. However and combination of primary and secondary incorporating voltages of 600 volts and below is available on a short lead time, special order basis. In addition, capacities up to 25 kVA and special temperature rise configurations can be furnished. Please consult your distributor, Dongan Representative or the factory for special ES Series transformer requirements.

CE Marked
TÜV Rheinland Licensed, R 9679035.01
UL Listed, File E3210
CSA Listed thru UL, FIle E3210

NEMA 12, IP54 enclosure.
All copper windings.
IEC type finger safe terminals.
200° C (H) Insulation System.
50/60 Hertz.
Class 1, general use, isolating transformer.

All Series ES are provided with an electrostatic shield (earth metal screen)
All Series ES are provided with an color coded protective earth (PE) terminal.
Consult factory for desired voltage combinations and kVA sizes not listed.

Primary Secondary
380 / 400 / 416 / 440 / 460 / 480 / 575 110 / 115 / 120
220 / 380 / 400 / 416 120 / 240

Dongan Single Phase Encapsulated Transformer Catalog Pages

Updated on February 26, 2016 10:53 AM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com