Spec Tech Industrial

Back___________________Next__________________Home

Buy Your Industrial Control Products Here!

Gemco Parts Description Page 15

Part
Number
Product
Category
Description
2110-V1-K1-D0-A0-N0 Brake Parts Ametek Gemco Shut Height Monitor 
Model 2110-V1-K1-D0-A0-N0  
2 Channel Analog Output 
V1 = LDT Board Input 
K1 = With Relay Board 
D0 = Without Digital Output Board 
A0 = Without Analog Board 
N0 = No Enclosure Supplied. NEMA 4 & 12 are available
2110-V1-K1-D0-A0-N12 Brake Parts Ametek Gemco Shut Height Monitor 
Model 2110-V1-K1-D0-A0-N12  
V1 = LDT Board Input 
K1= With Relay Board, 2 Form C Relays 
D0 = Without Digital Output Board 
A0 = Without Analog Board 
N12 = NEMA 12 Rated Enclosure
2120-L1-K0-D0-A0-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model AME-2120-L1-K0-D0-A0-N0 for accurate, absolute position sensing Standard RS232/485 Communication Port 
L1 = 952 Digital Input Board 
K0 = Without Relay Board 
D0 = Without Digital Output Board 
A0 = Without Analog Board 
N0 = No enclosure is to be supplied
2120-L1-K0-D1-A0-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-L1-K0-D1-A0-N0 for accurate, absolute position sensing Standard RS232/485 Communication Port 
L1 = 952 Digital Input Board 
K0 = Without Relay Board 
D1 = "Sinking" Digital Output Type 
A0 = Without Analog Board 
N0 = No enclosure is to be supplied
2120-R1-K0-D0-A0-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D0-A1-N0 for accurate, absolute position sensing. Standard RS232/485 Communication Port 
R1 = Resolver Input 
K0 = Without Relay Board 
D0 = Without Digital Output Board 
A0 = Without Analog Board 
N0 = No enclosure
2120-R1-K0-D0-A1-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D0-A1-N0 for accurate, absolute position sensing. Standard RS232/485 Communication Port 
R1 = Resolver Input 
K0 = Without Relay Board 
D0 = Without Digital Output Board 
A1 = Two Channel Analog Output Programmable for Voltage or Current 
N0 = No enclosure
2120-R1-K0-D0-A1-N4 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D0-A1-N4 for accurate, absolute position sensing. Standard RS232/485 Communication Port 
R1 = Resolver Input 
K0 = Without Relay Board 
D0 = Without Digital Output Board 
A1 = Two Channel Analog Output Programmable for Voltage or Current 
N4 = NEMA 4 Enclosure
2120-R1-K0-D1-A0-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D1-A0-N0 for accurate, absolute position sensing Standard RS232/485 Communication Port 
R1 = Resolver Board Input 
K0 = Without Relay Board 
D1 = "Sinking" Digital Output Type 
A0 = Without Analog Board 
N0 = No enclosure is to be supplied
2120-R1-K0-D1-A0-N12 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D1-A0-N12 for accurate, absolute position sensing Standard RS232/485 Communication Port 
R1 = Resolver Board Input 
K0 = Without Relay Board 
D1 = "Sinking" Digital Output Type 
A0 = Without Analog Board 
N12 = NEMA 12 Rated Enclosure
2120-R1-K0-D1-A1-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D1-A1-N0 for accurate, absolute position sensing. Standard RS232/485 Communication Port 
R1 = Resolver Input 
K0 = Without Relay Board 
D1 = Sinking Digital Output "E",  
A1 = Two Channel Analog Output Programmable for Voltage or Current 
N0 = No enclosure
2120-R1-K0-D2-A0-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D2-A0-N0 for accurate, absolute position sensing Standard RS232/485 Communication Port 
R1 = Resolver Board Input 
K0 = Without Relay Board 
D2 = "Sourcing" Digital Output Type 
A0 = Without Analog Board 
N0 = No enclosure is to be supplied
2120-R1-K0-D2-A1-N4 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D2-A1-N4 for accurate, absolute position sensing. Standard RS232/485 Communication Port 
R1 = Resolver Input 
K0 = Without Relay Board 
D2 = Digital Output Board Sourcing 
A1= Two Channel Output Board Programmable for Voltage or Current 
N4 = NEMA 4 Rated Enclosure
2120-R1-K0-D3-A0-N4 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D3-A0-N4 for accurate, absolute position sensing. Standard RS232/485 Communication Port. 
R1 = Resolver Input 
K0 = Without Relay Board 
D3 = TTL Digital Output 
A0= Without 2 Channel Analog Output Board 
N4 = NEMA 4 Enclosure
2120-R1-K0-D3-A1-N0 Brake Parts Ametek Gemco Series 2120 PLC Interface Module model 2120-R1-K0-D3-A1-N0 for accurate, absolute position sensing. Standard RS232/485 Communication Port. 
R1 = Resolver Input 
K0 = Without Relay Board 
D3 = TTL Digital Output 
A1 = Programmable for voltage or Current  
N0 = No Enclosure
23033 Brake Parts Ametek Gemco Pneumatic Air Releasing Cylinder on a 10 Inch Type "S"Hydraulic Brake Assembly. The parking feature is spring set & pneumatically released.
23040 Brake Parts Ametek Gemco Piston Rod Assembly
2500-WINN-CD Brake Parts Ametek Gemco Software. Communication software, Windows based for programing the 2500 PLS. Programing can be done on your computer rather than on the PLS
2500C Brake Parts Ametek Gemco Main Controller Part # 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-B-A-R-A-0A8D-X-12 Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch. 
2500C-B-A-R-A-0A8D-X-12 
B = Blind Unit , Remote Operator Interface Required 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8D = Qty. 8, DC Relays 
X = No Options 
12 = NEMA 12 Enclosure / Main Controller Only 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-B-A-R-A-0A8D-X-12A Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch. 
2500C-B-A-R-A-0A8D-X-12A 
B = Blind Unit , Remote Operator Interface Required 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8D = Qty. 8, DC Relays 
X = No Options 
12A = NEMA 12 Enclosure with room for up to 2 Panel Mount Expansions 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-0A6A-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch. 
2500C-F-A-R-A-0A6A-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A6A = Qty. 6, AC Solid State Relays Rated @ 3 AMPS 
X = No Options 
X = No Enclosure 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-0A8A-B-12A Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-0A8A-B-12A 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8A = Qty. 8, AC Solid State Relays Rated @ 3 AMPS 
B = Brake Monitor 
12A = NEMA 12 Enclosure with room for up to 2 panel mount expansions 
Warranty: Limited 1 Year Warranty, Parts & Labor, F.O.B. Gemco
2500C-F-A-R-A-0A8A-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch. 
2500C-F-A-R-A-0A8A-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8A = Qty. 8, AC Solid State Relays Rated @ 3 AMPS 
X = No Options 
X = No Enclosure 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-0A8D-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-0A8D-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8D = Qty. 8, DC Solid State Relays, Rated @ 3 AMPS 
X = No Options 
X = No Enclosure 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-0A8M-X-12A Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-0A8M-X-12A 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8D = Qty. 8, DC Mechanical Relays Rated @ 8 AMPS. (for this option all relays must be mechanical) 
X = No Options 
12A = NEMA 12 Enclosure with Room for 2 Panel Mount Expansions 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-0A8M-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-0A8M-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
0A8D = Qty. 8, DC Mechanical Relays Rated @ 8 AMPS. (for this option all relays must be mechanical) 
X = No Options 
X = No Enclosure 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-4A4D-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-4A4D-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
4A4D = Qty. 4, AC Solid state Relays & Qty. 4, DC Solid State Relays, Both Rated @ 3 AMPS 
X = No Options 
X = No Enclosure 
1 Year Limited Warranty, 1 Year Parts & Labor F.O.B. Gemco
2500C-F-A-R-A-8A0D-X-12 Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-8A0D-X-12 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
8A0D = Qty. 8, AC Solid State Relays Rated @ 3 AMPS 
X = No Brake Monitoring Option 
12 = NEMA 12 Enclosure for Main controller Only. No expansion modules 
Warranty: Limited 1 Year Warranty, Parts & Labor, F.O.B. Gemco
2500C-F-A-R-A-8A0D-X-X Brake Parts Ametek Gemco Series 2500 Programmable Limit Switch 
2500C-F-A-R-A-8A0D-X-X 
F = Stand Alone Unit, Face or Flange Mount 
A = General Software 
R = Resolver Input 
A = AC Input Power 100 to 240 Volt 50 or 60 Hz 
8A0D = Qty. 8, AC Solid State Relays, Rated @ 3 AMPS 
X = No Options 
X = No Enclosure 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500E Brake Parts Ametek Gemco Expansion Module
2500E-A-0A8D-X Brake Parts Ametek Gemco Series 2500 Expansion Module 2500E-A-08D-A 
A = AC Input Power 100 to 240 Volt, 50 / 60 Hz. 
0A8D = Qty. 8, DC Relays 
X = No Options 
Warranty 1 Year Parts & Labor F.O.B. Gemco
2500E-A-8A0D-X Brake Parts Ametek Gemco Series 2500 Expansion Module 
2500E-A-8A0D-X 
A = AC Input Power 100 to 240 Volt, 50 / 60 Hz. 
8A0D = Qty. 8, AC Relays 
X =No Options. 
Warranty: Limited 1 Year Warranty, Parts & Labor, F.O.B. Gemco
2500R-X Brake Parts Ametek Gemco Remote Operator Interface. 2500 Series 
Warranty 1 Year Parts & Labor F.O.B. Gemco
279B97H02 Brake Parts Westinghouse Solenoid Assembly. See E005055 on a CB-35 5.5 Inch Diameter Brake, includes the Plunger & Solenoid Guides No coil. 3279B97H02 (5LBS)
3000-107 Brake Parts Ametek Gemco Gear Reducer, Right Angle, 30 to 1 Gear Ratio, R4
3000-150R Brake Parts Ametek Gemco Gear Reducer for a 1980 Series Rotary Limit Switch. 10 to 1 Ratio with a Straight / Parallel Drive . Right Hand. A main shaft must be purchased along with the gear reducer (6LBS)
3000-167L Brake Parts Ametek Gemco Gear Reducer. Straight Drive Gear Reducer with a 200 to 1 Ratio. Not available without a main shaft PM0188503
3000150R Brake Parts Ametek Gemco Gear Reducer for a 1980 Series Rotary Limit Switch. 10 to 1 Ratio with a Straight / Parallel Drive . A Main Shaft must be purchased with the gear reducer (6LBS)
3001-1 Brake Parts Ametek Gemco 1/2 Inch Sprocket Drive Coupling. Maximum torque rating 300 lb.-in. 1/2inch direct & sprocket drive 404 woodruff keyway & key. 50 turns of the adjusting screw will rotate coupling 360 degrees.
3001-101 Brake Parts Ametek Gemco Coupling. OBSOLETE SEE 3001-3 Adjustable Coupling for Presses. Provides means of changing the position between cam shaft and sprocket in 5 degree increments. 3/4 Inch Shaft Size. Sprockets are sold separately. Sprockets for this coupling work with # 25, #35 or # 50 Size Chain. Sprocket Teeth Available 30, 32, 35, or 36. If sold with a sprocket the sprocket comes mounted to the coupling.If sold less sprocket customer to supply sprocket mounting hardware, Qty.3, 1/4 -20 Bolts. Hardware must not extend more than 1/4 Inch past the sprocket (5LBS)
3001-2 Brake Parts Ametek Gemco 1/2 Inch Direct Drive Coupling. Maximum torque rating 300 lb.-in. 1/2inch direct & sprocket drive 404 woodruff keyway & key. 50 turns of the adjusting screw will rotate coupling 360 degrees. (1LB)
3001-3 Brake Parts Ametek Gemco Coupling. Adjustable Couplings changing timing between cam shaft and sprocket. Loosen Lock Screw and Rotate the Adjustment Screw. 50 Turns = 350 Degrees of rotation. Sprockets are sold separately. Sprockets for this coupling work with #35 Size Chain. Sprocket Teeth Available 30, 32, 35, or 36. If sold with a sprocket the sprocket comes mounted to the coupling.If sold less sprocket customer to supply sprocket mounting hardware, Qty.3, 1/4 -20 Bolts (5LBS)
3001-4 Brake Parts Ametek Gemco Coupling. Adjustable Coupling to facilitate easy Timing Adjustment between the 3/4 Inch Cam Shaft and the 3/4 Inch Drive Shaft. Loosen Lock Screw and Rotate the Adjustment Allen Screw. 50 Turns = 350 Degrees of rotation. Coupling has a 3/4 Inch Shaft Diameter Shaft which Extends 1.5 Inches from the Coupling, Shaft includes a # 606 Woodruff Key & Keyway. Coupling Bore Diameter 3/4 inch with Woodruff Keyway. Overall Length 3.125 Inches. Maximum Torque Capability 785 LB. / IN. (3LBS)
304 Stainless Steel Brake Parts Ametek Gemco Adder for a 304 stainless steel enclosure, cover, latches, camshaft, bearing flanges & flange bolts. The stainless steel enclosure is finished with a Gemco Gray Enamel Finish. It is not polished stainless steel.
439C394G01 Brake Parts Ametek Gemco Brake Shoe & Lining Complete see E019024
49974 Brake Parts Ametek Gemco Dual Air Reservoir (Old Wagner P/N AD49974) 23 LBS Net
6" H 1 Brake Parts Ametek Gemco Hydraulic Brake System for Progressive / Controlled Stopping Torque. Torque range of 0 through 150 FT LBS. via Foot Pedal Pressure. System Type H with 1, 6 Inch Hydraulic Brake Assembly J23020. System includes Foot Pedal J008219 & Control Cylinder J017616, Fluid Reservoir / Bleeder, Bleeder Pushbutton J10808 , 100 FT Copper Tubing, Brake Fluid, Fittings, Gaskets and Armored Flexible Hoses. Specify whether 230 V DC, 115 V AC or a manual 1/4 turn valve for operation for the bleeder. Less a 6 X 3 Inch Brake Wheel
6" H 2 Brake Parts Ametek Gemco 6 Inch Hydraulic Brake System, Qty. 2, Brake Assemblies, Control Cylinder, Pedal, Fluid Reservoir Bleeder, Tubing, Fluid and Fittings for a complete system, less brake wheels.
6" HM 1 Brake Parts Ametek Gemco Brake System. HM Brake System (with parking) 6 X 3.25 Inch for Progressive / Controlled Stopping Torque and Parking. Torque range of 0 through 150 FT LBS. via Foot Pedal Pressure along with Spring Set Parking & Holding. Parking Brake Torque 35 FT LBS. Includes one 6 Inch Diameter Hydraulic Brake Assembly, HM Control Unit, Parking Brake Control Station with Signal Light, Foot Pedal & Control Cylinder, Fluid Reservoir / Bleeder, Bleeder Pushbutton, 150 FT Copper Tubing, Wagner 21B Super Heavy Duty Brake Fluid, Fittings, Gaskets and Armored Flexible Hoses. Specify whether 230 VDC or 115 VAC for the bleeder operation. A manually operated bleeder is also available. Less Brake Wheel (136LBS)
6" HM 2 Brake Parts Ametek Gemco Brake System. HM Brake System with parking. 2, 6 X 3.25 Inch Brakes for Progressive / Controlled Stopping Torque and Parking. Torque range of 0 through 300 FT LBS. via Foot Pedal Pressure along with Spring Set Parking & Holding. Parking Brake Torque 70 FT LBS. Includes two 6 Inch Diameter Hydraulic Brake Assembly, HM Control Unit, Parking Brake Control Station with Signal Light, Foot Pedal & Control Cylinder, Fluid Reservoir / Bleeder, Bleeder Pushbutton, 150 FT Copper Tubing, Wagner 21B Super Heavy Duty Brake Fluid, Fittings, Gaskets and Armored Flexible Hoses. Specify whether 230 VDC or 115 VAC for the bleeder operation. A manually operated bleeder is also available. Less Brake Wheel
71211SN1MM00N0C111C8 Brake Parts Ametek Gemco Coil . DC 240 Volt Coil for new style FRB's (1LB)
76-1200 Brake Parts Ametek Gemco Roller Arm. Part of a 04537004
8"-H-1 Brake Parts Ametek Gemco 8 Inch Hydraulic Type H Brake System. Provides infinitely variable progressive brake application for smooth controlled braking. 0 to 200 LBS. / FT dynamic stopping torque. Includes Qty.1, 8 Inch Hydraulic Brake Assembly, Fluid Reservoir Bleeder, Pushbutton Switch with Enclosure for operating the bleeder check valve, Control Cylinder with Foot Pedal, 100 Feet of Hydraulic Tubing, Tube Fittings, Unions, Clamps, Bushings, Brackets, Gaskets, 4 Armored Flexible Hoses & Wagner 21B DOT 3 Super Heavy Duty Brake Fluid SAE1703. 8 Inch Brake Weight 28 LBS. Overall Width 7 - 1/4 Inch , Height 12 - 9/16 Inch. Please specify whether the Fluid Reservoir Bleeder is to be AC DC or manually operated. A 8 X 3.25 Inch Brake Wheel is not included
8"-H-2 Brake Parts Ametek Gemco Hydraulic Brake System, Complete Type H Brake System. Infinitely Progressive Braking Torque, 0 to 400 Foot LBS via Foot Pedal Pressure based on a Maximum Pedal Pressure of 70 LBS. Includes Qty. 2, 8 Inch Hydraulic Brake Assemblies J002779, 230 Volt DC Fluid Reservoir Bleeder, Bleeder Pushbutton Station J10008, Control Cylinder J017616 with Pedal J008219, J73901 Installation Kit which includes, 250 Feet of Copper Tubing, Tube clamps, Tube Bushings, Tube Fittings, Tube Unions, Tube Tee, Qty.6, Armored Hose Kits J010797 & 1 Gallon of Wagner 21B Brake Fluid F9314 (189LBS) AME-80200013
8"-HM-1 Brake Parts Ametek Gemco 8 X 3.25 Inch Hydraulic Brake System Type HM for Progressive / Controlled Stopping Torque and Parking. Torque range of 0 through 200 FT LBS. via Foot Pedal Pressure along with Spring Set Parking & Holding. Parking Torque 50 FT LBS. Includes one 8 Inch Diameter Hydraulic Brake Assembly, HM Control Unit, Parking Brake Control station with Signal Light, Foot Pedal & Control Cylinder, Fluid Reservoir / Bleeder, Bleeder Pushbutton, 150 FT Copper Hydraulic Tubing, Wagner 21B Super Heavy Duty Brake Fluid, Fittings, Gaskets and Armored Flexible Hoses. Specify whether 230 VDC or 115 VAC for the bleeder operation. A manually operated bleeder is also available. Less Brake Wheel. 139 LBS Net.
8"-HM-2 Brake Parts Ametek Gemco 8 X 3.25 Inch Hydraulic Brake System Type HM for Progressive / Controlled Stopping Torque and Parking. Torque range of 0 through 200 FT LBS. via Foot Pedal Pressure along with Spring Set Parking & Holding. Parking Torque 50 FT LBS. Includes one 8 Inch Diameter Hydraulic Brake Assembly, HM Control Unit, Parking Brake Control station with Signal Light, Foot Pedal & Control Cylinder, Fluid Reservoir / Bleeder, Bleeder Pushbutton, 150 FT Copper Hydraulic Tubing, Wagner 21B Super Heavy Duty Brake Fluid, Fittings, Gaskets and Armored Flexible Hoses. Specify whether 230 VDC or 115 VAC for the bleeder operation. A manually operated bleeder is also available. Less Brake Wheel. 139 LBS Net.
8020 Brake Parts Ametek Gemco AHM / ERC System. Qty. 2, 18 X 8 Inch Type HM Brakes. Includes Qty. 2, J007905 Brake Actuators, Qty. 2, 18 X 8 Type HM Hydraulic Brakes, J066962 Treadle Vale Installation Kit, J0790942 Air Compressor 3/4 HP, J071030 Tubing Installation Kit, J073900 Tubing Kit (2 Hoses & 50 Feet of Tubing) J073903 Tubing Kit (4 Hoses with 200 Feet of Tubing) AHM / ERC Panel, DC 1 X 8 Ratio, Qty 2, PSD0180100 FRB Unit
8020-0042 Brake Parts Ametek Gemco AH/ERC Conversion System. Converts a Type "H" Brake System (without parking) into a Electrically Controlled System. Includes one J070943 Air Compressor 3/4 HP 230 VDC., one J070972 AH/ERC Control Panel 230 VDC pre-piped and pre-wired, one J073910 Installation Kit which includes tubing, fittings, unions, gaskets and brake fluid. Panel has one JC54086 Pressure Cluster for 1 & 2 brake systems. "Small Panel" 27 Inches Wide X 33 Inches High
8020-0044 Brake Parts Ametek Gemco AH/ERC Brake Conversion System, 480 VAC, includes one 8 to 1 Ratio pressure cluster on 70970 control panel, one 3/4 HP 70942 AC Compressor and J073910 tubing installation kit. For use with existing manual hydraulic foot pedal in cab and existing single 18" hydraulic brake
8020-0046 Brake Parts Ametek Gemco: Brake System: Conversion: AHM/ERC Conversion System. Converts a Type "H" Brake System (without parking) into a Electrically Controlled System. Includes one J070943 Air Compressor 3/4 HP 230 VDC., one J100650 AHM/ERC Control Panel 230 VDC pre-piped and pre-wired, one J073910 Installation Kit which includes tubing, fittings, unions, gaskets and brake fluid. One PSD0180101 Fluid Reservoir Bleeder 230 VDC. Panel has one JC54086 Pressure Cluster for 1 & 2 brake systems. Panel Dim. 33 Inches Wide X 45 Inches High
8020-0052 Brake Parts Ametek Gemco AH/ARC Conversion System from manually operated Type H systems (without parking) to air over hydraulic. (2 brake system) Includes one 3/4 HP motor driven compressor, one pre-piped, pre-wired control panel, one installation kit including hose, tubing, fittings. 230VDC, 8:1 pressure ratio. Air treadle valve sold separately.
8020-0621 Brake Parts Ametek Gemco Conversion System for a 10 Inch Hyd System from H To HM
8020-1409 Brake Parts Ametek Gemco AH/ERC Conversion System for 4 brake system. Includes the following: J070943 Air Compressor 3/4 HP 230VDC, J070896T AH/ERC Control Panel with 2, 8:1 Pressure Clusters & J073910 Tubing Installation Kit. Treadle Valve and fluid reservoir bleeders are not included.
8020-1433 Brake Parts Ametek Gemco Conversion System. Type "H" Hydraulic Brake Systems to "HM" Hydraulic Brake System with a Parking Feature. for one 14 X 6 Inch Brake. Includes one each of the following: J023437 Brake Actuator, J045767 Control Station switch with Lamp, J070899 Kit Modifier, J073900 Installation Kit with 50 Ft Copper Tubing, 2 Armored Hoses & Fittings, J079462 14 Inch HM Brake Cylinder, PSD0180101 Fluid Reservoir Bleeder 230 VDC
Updated on February 26, 2016 1:24 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com