Spec Tech Industrial

Back___________________Next__________________Home

Buy Your Industrial Control Products Here!

Gemco Parts Description Page 16


Part
Number
Product
Category
Description
8020-1440 Brake Parts Ametek Gemco AH/ERC Conversion system for use with a single hydraulic brake. Includes 70943 compressor 3/4HP 230VDC, 70984T panel with one 8:1 pressure cluster, 66962 treadle valve installation kit including 107039 treadle valve, 71030 tubing installation kit.
80200002 Brake Parts Ametek Gemco Type H Brake System Qty 1, 6 X 3
80200013 Brake Parts Ametek Gemco Hydraulic Brake System, Complete Type H Brake System. Infinitely Progressive Braking Torque, 0 to 400 Foot LBS via Foot Pedal Pressure based on a Maximum Pedal Pressure of 70 LBS. Includes Qty. 2, 8 Inch Hydraulic Brake Assemblies J002779, 230 Volt DC Fluid Reservoir Bleeder, Bleeder Pushbutton Station J10008, Control Cylinder J017616 with Pedal J008219, J73901 Installation Kit which includes, 250 Feet of Copper Tubing, Tube clamps, Tube Bushings, Tube Fittings, Tube Unions, Tube Tee, Qty.6, Armored Hose Kits J010797 & 1 Gallon of Wagner 21B Brake Fluid F9314 (189LBS)
80200015 Brake Parts Ametek Gemco Hydraulic Brake System, Complete Type H Brake System. Infinitely Progressive Braking Torque, 0 to 400 Foot LBS via Foot Pedal Pressure based on a Maximum Pedal Pressure of 70 LBS. Includes Qty. 2, 10 Inch Hydraulic Brake Assemblies J002926, Fluid Reservoir Bleeder, Bleeder Pushbutton Station J10008, Control Cylinder J017616 with Pedal J008219, J73901 Installation Kit which includes, 250 Feet of Copper Tubing, Tube clamps, Tube Bushings, Tube Fittings, Tube Unions, Tube Tee, Qty.6, Armored Hose Kits J010797 & 1 Gallon of Wagner 21B Brake Fluid F9314. Brake Wheels are not included. Please specify whether the Fluid Reservoir Bleeder is to be AC DC or manually via a 1/4 Turn Ball Valve (189LBS)
80200042 Brake Parts Ametek Gemco AH/ERC Conversion System, for 230 VDC, with a Single 8 X 1 Pressure Cluster
80200052 Brake Parts Ametek Gemco AH/ARC Conversion System, VDC
802002-0288 Brake Parts Ametek Gemco Bridge Brake System, Qty. 4, 10X4 Brakes, Single Station, Type A/H-ARC Complete System less brake wheels. Supply voltage 230 VDC, with 7/8 inch brake actuators and 1X5 ratio A/H pressure cluster for maximum torque of 380 LBS FT per brake
80201500 Brake Parts Ametek Gemco AH/ERC, 230 VDC, 2 Brake 18 Inch Hyd Brake, Moving Cab No Pedal
81101008 Brake Parts Ametek Gemco Heavy Duty AISE Spring Set Magnetic Release Shoe Brake Assembly, Direct Current Clapper Type, 10 Inch Wheel Diameter, Voltage DC with Shunt Wound Coils. 200 FT. LBS. 1 Hour. The TMSC Brake has interlocking shoe arms that allow single point adjustment for lining wear. Brake Weight 165 LBS. Net 190 LBS Gross. A 10 X 3.75 Inch Brake Wheel is not included. This brake is also available to operate via a hydraulic slave cylinder for progressive brake application from a crane cab. A Rectifier for AC Voltages is an available option
8130-12-2-A-S-R Brake Parts Ametek Gemco Electro-thrust disc brake assembly for 12" diameter disc, 240 VAC 3PH, standard transformer oil, standard setting delay without valves, right hand orientation for actuator.
8138 Brake Parts Ametek Gemco Belt for the Air Compressor & Motor Assembly
8210-6-16-A-S-Y-X-X-L Brake Parts Ametek Gemco Electro-Thrust Brake Assembly. Series 8210 
16 = 16 Inch Diameter Brake / Wheel 
6 = 230 Volt DC Thruster Motor 
A = X-Former Thruster Oil providing an operating range of -13 thru 104 Degrees F 
S = Setting Delay Valve Included / Brake Setting Times with the Adjustable Valve 0.80 to 3.8 Sec., to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application 
Y = Self Adjusting Mechanism providing automatic compensation for lining wear 
X = No Limit switches  
X = No Hand Relased 
L = Left Hand Actuator Orientation 
Torque Rating 1000 LB FT 
Built to AISE Specifications (same foot print, relationship to brake wheel & torque as a TM-1665) 
Spring Applied Electrohydraulic Release 
L = Left Hand Actuator Orientation (400LBS)
8210-8-4-A-S-X-X-N-I Brake Parts Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications (same foot print, relationship to brake wheel & torque as a TM-83), Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F., Brake Setting Times with the Adjustable Valve 1.5 to 7.2 Sec., to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. Includes a Non-Latching Hand Release 140 LBS + skid. Ships via motor freight
8210-8-4-A-S-X-X-X-I Brake Parts Ametek Gemco Electro-Thrust Brake Assembly, 8 Inch Diameter Brake, 100 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Built to AISE Specifications (same foot print, relationship to brake wheel & torque as a TM-83), Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F., Brake Setting Times with the Adjustable Valve 1.5 to 7.2 Sec., to softly apply the brake. Engineered for Overhead Crane Trolley & Bridge Applications to reduce swinging loads. NOT designed for hoist application. 140 LBS + skid. Ships via motor freight
82101056 Brake Parts Ametek Gemco Electro-Thrust Brake Assembly, 14 Inch Diameter, 800 LB FT, 230 / 460 VAC, 3 Phase, 60 Hz., Spring Applied Electrohydraulic Release, -13 thru 104 Degrees F. Brake Setting Times, Without Adjusting Valve 0.75 Sec. With Adjusting Valve 1.2 to 4.8 Sec. to softly apply the brake, 320 LBS + skid Ships via motor freight. Options available at additional cost include: Self Adjusting Mechanism for Lining Wear, Limit Switches for set and release information, Silicon Fluid for low temperature application -40 degrees F., Hand Release (latching or non-latching) enclosures, strip heaters & hydraulic actuators for auxiliary cab control via a progressive hydraulic brake pedal
909-12-CD-4-R-SP Brake Parts Ametek Gemco Kam-Way Linear Limit Switch Series 909-12-CD-4-R-SP 
12 = 12 Inches of Active travel 
CD = Limit Switch with Cable Drive 
4 = 4 Switches 
R = Right Hand Assembly 
SP = Single Pole Double Throw Switches
909-66-AA-10-R Brake Parts Ametek Gemco Series 909. Since we do not know exact part number this is our best estimate. A 66 Inch Stroke is a special unit
917-65-CD-12-SP Brake Parts Ametek Gemco Obsolete 917 Cycle-Set 
65 = Active Travel 
CD = 
12 = Qty of Switches  
SP= Single Pole Double Throw Switches 
Only parts available are the 
Switches 1950-1-C-A-DO SPDT 
Switches 1950-1-C-A-DO DPDT 
Spring, Main Spring M0299700
925-1623 Brake Parts Ametek Gemco Linear Cable Reel Sensor. Like model 925-A2-78-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
78 = 78 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options 
Engineer part number and product. Has a gear ratio that allows the 04535001or SD0308900 resolver to turn 1 revolution for every 11 inches of active travel / stroke 
1/7 (15LBS)
925-1675 Brake Parts Ametek Gemco Linear Cable Reel Sensor with 60 Inches of Active Stroke and an 18 Inch Lead in Cable 05
925-A2-136-90-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-136-90-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
136 = 136 Inch Active Stroke Electronically, The single turn resolver will make a 350 degree turn over this length. recommend use of 132 or 138 (6" increments) 
90 = 90 Inches of Initial Lead in Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device which is not included  
X = No Other Options
925-A2-144-72-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-144-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
144 = 144 Inch Active Stroke Electronically, The single turn resolver will turn 350 degrees turn over this length.  
72 = 72 Inches of Initial Lead in Cable 
S = Single Turn Resolver is to be fed to a converting device which is not included  
X = No Other Options
925-A2-192-X-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-192-X-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
192 = 192 Inch Active Stroke Electronically, The single turn resolver will turn 350 degrees turn over this length.  
X = 0 Initial Lead In Cable Required 
S = Single Turn Resolver is to be fed to a converting device which is not included  
X = No Other Options
925-A2-78-72-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor. Model 925-A2-78-72-S-X 
A2 = 97 to 192 Inch Stroke Mechanical Capacity 
78 = 78 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
925-B1-168-72-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor. Model 925-B1-168-72-S-X 
B1 = 193 to 480 Inch Stroke Mechanical Capacity / Single Main Spring 
168 = 168 Inch Active Stroke 
72 = 72 Inches of Initial Lead In Cable 
S = Single Turn Resolver. Resolver single is to be fed to a converting device, which is not included 
X = No Other Options
925-B1-201-108-S-X Brake Parts Ametek Gemco Linear Cable Reel Sensor 
Model 925-B1-201-108-S-X  
B1 = 193 to 480 Inch Stroke / Single Spring 
201 = 201 Inch Active Stroke  
108 = 108 Inches of Initial Cable Lead in 
S = Single Turn Resolver. Resolver signal is to be fed to a converting device, not included  
X = No Other Options
940-0060-3E Brake Parts Ametek Gemco Linear Position Sensor 
6 Inch Active Stroke 
4 to 20mA 
Loop Power 
(6LBS)
940-0070-3E Brake Parts Ametek Gemco Linear Position Sensor 
7 Inch Active Stroke 
4 to 20mA 
Loop Power 
(6LBS)
940-0100-3E Brake Parts Ametek Gemco Linear Position Sensor 
10 Inch Active Stroke 
4 to 20mA 
Loop Power 
(6LBS)
940-0120-3E Brake Parts Ametek Gemco Linear Position Sensor 
12 Inch Active Stroke 
4 to 20mA 
Loop Power 
(6LBS)
940-0180-1E Brake Parts Ametek Gemco Linear Position Sensor 
18 Inch Active Stroke 
0 to 10 VDC 3 Wire 
(6LBS)
948001 Brake Parts Ametek Gemco Limit Module 
Supplies 4 Adjustable Set Points / Limits on an LDT or other analog output device  
Sinking, 0 - 10 Volts DC
948002 Brake Parts Ametek Gemco Limit Module 
Supplies 4 Adjustable Set Points / Limits on an LDT or other analog output device  
Sourcing, 0 - 10 Volts DC
949-003 Brake Parts Ametek Gemco Mounting Kit. LDT Mounting Kit includes, Head "L" Bracket M0748600 and the Probe Support Bracket SD0411200
949-005 Brake Parts Ametek Gemco Mounting Kit. Magnet Mounting Kit for LDT's. Non Ferrous Stainless Steel. Requires the use of the Large Split Magnet. For use with probes 940, 950IS, 951, 952 & 952QD (1LB)
949-019L12 Brake Parts Ametek Gemco Cable Connector for a 955A LDT. 5 Pin Straight Connector by 12 Foot Long
949-019L6 Brake Parts Ametek Gemco Cable Connector for a 955A LDT. 5 Pin Straight Connector by 6 Foot Long
949-021L12 Brake Parts Ametek Gemco Cable Connector. 6 Pin, 12 Foot with a straight connector
949-021L6 Brake Parts Ametek Gemco Cable Connector. 6 Pin, 6 Foot with a straight connector
949-022L12 Brake Parts Ametek Gemco Cable Assembly. 6 Pin Connector by 12 Foot with a Right Angle Connector
949-022L6 Brake Parts Ametek Gemco Cable Assembly. 6 Pin Connector by 6 Foot with a Right Angle Connector
949-023L15 Brake Parts Ametek Gemco Cable Assembly 23 Feet
949001L12 Brake Parts Ametek Gemco Cable Assembly. Cable with 12mm Euro Straight Connector, 12 Foot Length. For connection of 955S, 955LC, 956S & 956LC LDT's to the PLS
949001L6 Brake Parts Ametek Gemco Cable Assembly. Cable with 12mm Euro Straight Connector, 6 Foot Length. For connection of 955S, 955LC, 956S & 956LC LDT's to the PLS
949002L12 Brake Parts Ametek Gemco Cable Connector, 4 Pin, 12 Foot with Right angle 12mm Euro Connector. Compatible with 956S & LC LDT"S (1LB)
949002L6 Brake Parts Ametek Gemco Cable Assembly for use with the 955S & LC LDT'S. 4 Pin Micro 12mm Euro Straight Cable by 6 Foot Long (2LBS)
949003 Brake Parts Ametek Gemco Mounting Kit. Probe Mounting Kit. Includes End Clamp M0748600 & Rod Support Bracket SD0411200. Non Ferrous Stainless Steel. For use with probes 940, 950IS, 951, 952 & 952QD Does not include magnet mount bracket
949005 Brake Parts Ametek Gemco Mounting Kit. Magnet Mounting Kit for LDT's. Non Ferrous Stainless Steel with Hardware. Requires the use of the Large Split Magnet. For use with probes 940, 950IS, 951, 952 & 952QD (1LB)
949011L12 Brake Parts Ametek Gemco Cable Assembly with Straight Micro Plug Connector for a 953 VMAX LDT. 12 Foot Long, 5 Pole Turck RK 4.5T-4/S618, 12mm Euro Connector, Shielded
949011L6 Brake Parts Ametek Gemco Cable Assembly with Straight Micro Plug Connector for a 953 VMAX LDT. 6 Foot Long, 5 Pole Turck RK 4.5T-4/S618, 12mm Euro Connector, Shielded
949012L6 Brake Parts Ametek Gemco Cable Connector for a 953 VMAX LDT. 6 Foot, 5 Pin Right Angle 12mm Euro Connector (Shielded)
949012l12 Brake Parts Ametek Gemco Cable Connector for a 953 VMAX LDT. 12 Foot, 5 Pin Right Angle 12mm Euro Connector (Shielded)
949019L12 Brake Parts Ametek Gemco Cable Connector. 5 Pin, 12 Foot Straight Connector for the 955A LDT. Other Lengths and Right Angle Connectors are available
949019L30 Brake Parts Ametek Gemco Cable Connector. 5 Pin, 30 Foot Straight Connector for the 955A LDT. Other Lengths and Right Angle Connectors are available
949019L6 Brake Parts Ametek Gemco Cable Connector. 5 Pin, 6 Foot Straight Connector for the 955A LDT. Other Lengths and Right Angle Connectors are available
949020L12 Brake Parts Ametek Gemco Cable Assembly. 5 Pin, 12 Foot with a Right Angle Cable Connector used with 956A LDT's
949020L6 Brake Parts Ametek Gemco Cable Assembly. 5 Pin, 6 Foot with a Right Angle Cable Connector. For use with 956A LDT
949023L12 Brake Parts Ametek Gemco Cable Assembly for a 955DQ & 956DQ LDT. 12 Pin Straight Connector for option "E" Euro Connector, 12 mm, by 12 Feet Long . Other lengths available add $ 2.00 per foot and change the last 2 digits of the part number
949023L25 Brake Parts Ametek Gemco Cable Assembly for a 955DQ & 956DQ LDT. 12 Pin Straight Connector for option "E" Euro Connector, 12 mm, by 25 Feet Long . Other lengths available add or subtract $ 2.00 per foot and change the last 2 digits of the part number
950-1510 Brake Parts Ametek Gemco 951A Linear Distance Transducer 951A with a 31.9 Inch Stroke & a 950 Mill Duty Housing 1/8
950-1527 Brake Parts 951AC10319N2D10.9E LDT  
950MD31.89A0B05.9OCXX
2/8
950-1586 Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950-1586 an Engineered Part Number 
12 Inch Active Stroke 
Rear Trunion Mount  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly
9501445-0380 Brake Parts Ametek Gemco Linear Distance Transducer 
Intrinsically Safe LDT is UL Listed for Class 1, Groups C & D; Class II, Groups E, F & G; and Class III, Hazardous Locations, when properly installed 
0605 = 60.5 Inches of Stroke 
Cable Assembly with a Straight Connector 04521210 by 6 Foot Long is included
9501445-0605 Brake Parts Ametek Gemco Linear Distance Transducer 
Intrinsically Safe LDT is UL Listed for Class 1, Groups C & D; Class II, Groups E, F & G; and Class III, Hazardous Locations, when properly installed 
0605 = 60.5 Inches of Stroke 
Cable Assembly with a Straight Connector 04521210 by 6 Foot Long is included 
 
Updated on February 26, 2016 1:25 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com