Spec Tech Industrial

Back___________________Next__________________Home

Buy Your Industrial Control Products Here!

Gemco Parts Description Page 17

Part
Number
Product
Category
Description
9501446-115-0380 Brake Parts Ametek Gemco Analog Transceiver for a 9501445 Linear Distance Transducer 
115 = 115 VDC Input Power 
0380 = 38 Inch Stroke
9501446-115-0605 Brake Parts Ametek Gemco Analog Transceiver for a 9501445 Linear Distance Transducer 
115 = 115 VDC Input Power 
0605 = 60.5 Inch Stroke
9501446-230-0605 Brake Parts Ametek Gemco Analog Transceiver for a 9501445 Linear Distance Transducer 
230 = 230 VDC Input Power 
0605 = 60.5 Inch Stroke
9501446-24-0605 Brake Parts Ametek Gemco Analog Transceiver for a 9501445 Linear Distance Transducer 
24 = 24 VDC Input Power 
0605 = 60.5 Inch Stroke
950MD-11A-0B-0C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-11A-0B-0C-X-X 
11A = 11 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-14A-0B-0C-C2-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-14A-0B-0C-C2-R 
14A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-16A-0B-0C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-16A-0B-0C-X-X 
16A = 16 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-18A-0B-0C-X-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-18A-0B-0C-C-R 
18A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch
950MD-18A-0B-0C-X-RF Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-18A-0B-X-RF 
18A = Active stroke in Inches 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
RF = Front & Rear Mount Spherical Rod Ends have been specified. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch 
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications
950MD-20A-0B-0C-X-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-20A-0B-0C-X-R 
20A = 20 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch
950MD-23A-18.4B-0C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-23A-18.4B-0C-X-X 
36A = 23 Inch Active Stroke 
18.4B = 18.4 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 5 Inches Overstroke / Fully Extended Overstroke in Inches 
X= Standard 1/2 Inch NPT Conduit Fitting 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-24A-0.5B-0.5C-C2-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0.5B-0.5C-C2-X 
24A = 24 Inch Active Stroke 
0.5B = 0.5 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0.5C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required
950MD-24A-0B-0C-X-F Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0B-0C-X-F 
24A = 24 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 3/4 Inch
950MD-30A-0B-0C-X-B1 Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-30A-0B-0C-X-B1 
30A = 46 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-30A-0B-0C-X-B3 Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-30A-0B-0C-X-B3 
30A = 30 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B3 = Protective Boot - Teflon Coated Fiberglass  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
(23LBS)
950MD-32A-2B-2C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-32A-2B-2C-X-X 
32A = 32 Inch Active Stroke 
2B = 2 Overstroke / Fully Retracted Overstroke in Inches 
2C = 2 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-33A-1B-1C-C2-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-33A-1B-1C-C2-X 
33A = Active stroke in Inches 
1B = 1 Inch Fully Retracted Overstroke in Inches 
1C = 1 Inch Fully Extended Overstroke in Inches 
C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only) 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications
950MD-34A-0B-0C-X-F Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-24A-0B-0C-X-F 
34A = 34 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
F = Front Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees. The Front mount also has a Spherical Rod End by 3/4 Inch
950MD-36A-0B-0C-C-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-C-X 
36A = 36 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C = MS Style Connector and Mate on the Side of the Housing, for old 950 LDT 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. A rear Trunnion Mount is provided for mounting either directly in front of the head Assembly or on the rear of the head. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-36A-0B-0C-C2-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-C2-R 
36A = 36 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on Side of Housing 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications.The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-36A-0B-0C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-36A-0B-0C-X-X 
36A = 36 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-45A-0B-0C-X-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-45A-0B-0C-X-X 
45A = 45 Inch Active Stroke 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
X = No other mounting options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The Front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-46A-0B-0C-X-B1 Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-46A-0B-0C-X-B1 
46A = 46 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees 
950MD-46A-0B-0C-X-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-46A-0B-0C-X-R 
46A = Active stroke in Inches 46" 
0B = 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
R = Rear Mount Spherical Rod End 3/4 Inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch
950MD-60A-0B-0C-X-B1 Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-60A-0B-0C-X-B1 
60A = 60 Inch Active Stroke 
0B = 0 None 0 Overstroke / Fully Retracted Overstroke in Inches 
0C = 0 None 0 Overstroke / Fully Extended Overstroke in Inches 
X = Standard 1/2 Inch NPT Conduit Fitting 
B1 = Protective Boot - Neoprene Coated Nylon - 60 to 250 Degrees F 
Protects the LDT for resistance to water and oil. 
The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. A rear Trunnion Mount is provided for mounting either directly in front of the head assembly or on the rear of the head. The front mount has a Spherical Rod End by 1/2 Inch which is adjustable by approximately 3/4 of an Inch and can rotate 360 degrees
950MD-665A-0B-0C-C2-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-665A-0B-0C-C2-X 
665A = 66.5 Inches of Active Stroke 
0B = 0 Inch Fully Retracted Overstroke 
0C = 0 Inch Fully Extended Overstroke 
C2 = MS Style Connector and mate on Side of Housing (951 & 952 LDT's only) 
X = No Mounting or Extreme Condition Options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications
950MD-7A-0B-0C-C2-X Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-7A-0B-0C-C2-X 
24A = 24 Inch Active Stroke 
0B = 0 Inches of Overstroke / Fully Retracted Overstroke in Inches 
0C = 0.5 Inches Overstroke / Fully Extended Overstroke in Inches 
C2 = MS Style Connector and Mate on the Side of the Housing, 951 & 952 
X = No other options  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications. The 3/4 Inch Rear Rod End attaches to a threaded bolt extending from the rear of the head. The Front mount also has a Spherical Rod End by 1/2 Inch. The head contains 2, plugged air purge ports for additional cooling if required
950MD-84A-0B-0C-X-R Brake Parts Ametek Gemco Mill Duty Housing for Linear Displacement Transducers 
Model 950MD-84A-0B-0C-X-R 
84A = 84 Inches of Active Stroke 
0B = 0 Inch Fully Retracted Overstroke 
0C = 0 Inch Fully Extended Overstroke 
X = Standard 1/2 Inch conduit Fitting 
R = Rear Mount Spherical Rod end 3/4 inch with Mounting Bolt  
Protects the LDT from physical & environmental damage. The housing and body are manufactured from 304 stainless steel. A Rulon bearing assembly offers wear resistance and temperature immunity for the actuator assembly. Air purge ports are available at additional cost to allow clean, dry shop air to cool the electronics in high temp applications
951-1547 Brake Parts Ametek Gemco Linear Displacement Transducer. Quik-Stik II Engineered part number 
951VP = Variable Pulse  
3.2 Inch Stroke Length 
2.7 Inch Dead Band 
E = External Interrogation 
E = Environmental MS Connector 
Special Settings: Function 2, Wire Speed X 4 & Function F, Disable Fault Output 
Pre- programmed by Ametek 
(3LBS) 
similar to a 951VP-0032-X-D2.7EE except with special settings to multiply wire speed x 4, and disable the fault output
9511405 Brake Parts Ametek Gemco Programmer & PC Interface. Hand Held Programmer for Series 951 Quik-Stik II LDT Analog Units. Programs voltage type, span, polarity, zero reference and velocity with ASCII characters which are used to represent each function. Programmer interfaces with the LTD through a small phone jack connection attached to the end of the LDT cable. Operates off of a 9 volt battery which is included along with all cables and hardware to interface one LDT
9511465 Brake Parts Ametek Gemco Linear Displacement Transducer. 4 inch stroke. 0 - 10 Volt DC Output with velocity set at 2.5 Inches / Second. 2 weeks to ship.
951A-C1-0040-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0040-X-X-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0040 = 4 Inch Stroke Length 
X = Standard 1.5 Inch Null 
X = Standard 2.25 Inch Dead Zone 
E = Environmental MS connector (mating connector and / or pigtail must be ordered separately
951A-C1-0050-N2-D2-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0050-N2-D2-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0050 = 5 Inch Stroke Length 
N2 = 2 Null Zone 
D2 = 2 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0060-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0060-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0060 = 6 Inch Stroke Length 
N2 = 2 Inch Null over the STANDARD 1.5 Inches 
D5 = 5 Inch Dead Zone over the STANDARD 2.25 Inches 
E = Environmental MS Connector
951A-C1-0060-N3-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0060-N3-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0060 = 6 Inch Stroke Length 
N3 = 3 Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0070-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0070-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0070 = 7 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0088-N2-D5-C12 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0088-N2-D5-C12 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0088 = 8.8 Inch Stroke Length 
N2 = 2 Inch Null Zone over 1.5 Inches 
D5 = Non Standard Dead Zone over 2.25 Inches 
C12 = Potted Pigtail Assembly by 12 Feet
951A-C1-0098-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0098-X-X-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0098 = 9.8 Inch Stroke Length 
X = Standard 1.5 Inch Null 
X = Standard 2.25 Inch Dead Zone 
E = Environmental MS connector (mating connector and / or pigtail must be ordered separately
951A-C1-0183-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0183-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0183 = 18.3 Inch Stroke Length 
N2 = 2" Null over 1.5 Inches 
D5 = 5" Dead Zone over 2.25 Inches 
E = Environmental MS Connector
951A-C1-0210-X-X-C15 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0210-X-X-C15 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0210 = 21.0 Inch Stroke Length 
X = Standard 1.5 Inch Null 
X = Standard 2.25 Inch Dead Zone 
C15 = Potted Pigtail Assembly by 15 Feet
951A-C1-0220-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0220-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0220 = 22.0 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0240-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0240-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0240 = 24.0 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0321-N2-X-C12 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0321-N2-X-C12 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0321 = 32.1 Inch Stroke Length 
N2 = 2 Inch Null Zone over 1.5 Inches 
X = Standard Dead Zone of 2.25 Inches 
C12 = Potted Pigtail Assembly by 12 Feet
951A-C1-0330-N3-D6-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0330-N3-D6-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0330 = 33 Inch Stroke Length 
N3 = 3 Null over 1.5 Inches 
D6 = Dead Zone over 2.25 Inches 
E = Environmental MS Connector
951A-C1-0360-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0360-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0360 = 36 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0384-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0384-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0384 = 38.4 Inch Stroke Length 
N2 = 2" Null over 1.5 Inches 
D5 = 5 " Dead Zone over 2.25 Inches 
E = Environmental MS Connector
951A-C1-0450-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0450-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0450 = 45 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-0460-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0460-X-X-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0460 = 46 Inch Stroke Length 
X = Standard 1.5 Inch Null 
X = Standard 2.25 Inch Dead Zone 
E = Environmental MS connector (mating connector and / or pigtail must be ordered separately
951A-C1-0493-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-0493-N2-D5-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
0493 = 49.3 Inch Stroke Length 
N2 = 2 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-C1-1320-X-X-C10 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-1320-X-X-C10 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
1320 = 132 Inch Stroke Length 
X = Standard 1.5 Inch Null 
X = Standard 2.25 Inch Dead Zone 
C10 = Potted Pigtail Assembly by 10 Feet
951A-C1-2335-N3.3-D2-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-C1-2335-N3.3-X-E 
951A = Analog Style 
C1 = 4 to 20 mA Grounded (Sourcing)  
233.5 = 233 & 1/2 Inch Stroke Length 
N3.3 = 3.3 Inch Null Zone 
X = Standard Dead Zone of 2 .25 Inches 
E = Environmental MS Connector
951A-V-0010-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0040-X-X-E 
951A = Voltage  
0040 = 4 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector
951A-V-0040-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0040-X-X-E 
951A = Voltage  
0040 = 4 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector
951A-V-0042-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0042-X-X-E 
951A = Voltage  
0042 = 4.20 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector
951A-V-0060-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0060-X-X-E 
951A = Voltage  
0060 = 6 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector
951A-V-0070-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0150-N2-D5-E 
951A = Voltage  
0070 = 7 Inch Stroke Length 
N2 = 2 Inch Null Length 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-V-0080-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0040-X-X-E 
951A = Voltage  
0080 = 8 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector
951A-V-0100-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0100-X-X-E 
951A = Voltage  
0100 = 10 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector 
(4LBS)
951A-V-0110-N2-D5-C12 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0110-N2-D5-C12 
951A = Analog LDT  
V = Voltage Outputs 
0110 = 11 Inch Stroke Length 
N2 = 2 Inch Null Length 
D5 = 5 Inch Dead Zone 
C12 = Potted Pigtail cable Assembly by 12 Feet Long
951A-V-0120-X-X-C12 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0120-X-X-C12 
951A = Voltage  
0120 = 12 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
C12 = Potted Pigtail Assembly by 12 FT
951A-V-0140-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0140-N2-D5-E 
951A = Voltage  
0140 = 14 Inch Stroke Length 
N2 = 2 Inch Null Length 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
951A-V-0140-X-X-C-12 Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0140-X-X-C15 
951A = Voltage  
0140 = 14 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
C15 = Potted Pigtail Assembly by 15 FT
951A-V-0140-X-X-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0140-X-X-E 
951A = Voltage  
0140 = 14 Inch Stroke Length 
X = Standard 1.5 Inch Null Length 
X = Standard Dead Zone of 2.25 Inches 
E = Environmental MS Connector 
(4LBS)
951A-V-0150-N2-D5-E Brake Parts Ametek Gemco Quik-Stik II Linear Displacement Transducer. Model 951A-V-0150-N2-D5-E 
951A = Voltage  
0150 = 15 Inch Stroke Length 
N2 = 2 Inch Null Length 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector
Updated on February 26, 2016 1:26 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com