Spec Tech Industrial

Back___________________Next__________________Home

Buy Your Industrial Control Products Here!

Gemco Parts Description Page 19

Part
Number
Product
Category
Description
952RS-0360-X-X-E Brake Parts Ametek Gemco Linear Displacement Transducer 
952RS-0360-X-X-E 
952RS =Digital Version - Start/Stop Pulse 
0360 = 36 Inch Stroke Length 
X = Standard Null Length of 2 Inches 
X = Standard Dead Zone of 2 Inches 
E = Environmental MS Connector. Mating connector and / or pigtail must be ordered separately
952VP-0240-X-X-E-E-002 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0300-X-X-E-E-002 
"Blue Ox" 
VP = Variable Pulse 
0300 = 30 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector, Designation T is no longer available 
E = External Interrogation 
002 - Number of Recirculations
952VP-0300-X-X-E-E-002 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0300-X-X-E-E-002 
"Blue Ox" 
VP = Variable Pulse 
0300 = 30 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector, Designation T is no longer available 
E = External Interrogation 
002 - Number of Recirculations
952VP-0660-X-X-E-I-001 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0660-X-X-E-I-001 
"Blue Ox" 
VP = Variable Pulse 
0660 = 66 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector 
I = Internal Interrogation 
001 - Number of Recirculations (standard)
952VP-0710-X-X-E-I-001 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0710-X-X-E-I-001 
"Blue Ox" 
VP = Variable Pulse 
0710 = 71 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector 
I = Internal Interrogation 
001 - Number of Recirculations (standard)
952VP-0780-X-X-E-E-002 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0780-X-X-E-E-002 
"Blue Ox" 
VP = Variable Pulse 
0780 = 0780 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector, Designation T is no longer available 
E = External Interrogation 
002 - Number of Recirculations
952VP-0960-N2.5-D5-E-I-001 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-0960-N2.5-D5-E-I-001 
"Blue Ox" 
VP = Variable Pulse 
0960 = 96 Inch Stroke 
N2.5 = 2.5 Inch Null Zone 
D5 = 5 Inch Dead Zone 
E = Environmental MS Connector 
I = Internal Interrogation 
001 - Number of Recirculations ( standard) 
 
952VP-1560-X-X-E-E-002 Brake Parts Ametek Gemco Linear Displacement Transducer model 952VP-1560-X-X-E-E-002 
"Blue Ox" 
VP = Variable Pulse 
1560 = 1560 Inch Stroke 
X = Standard 2 Inch Null Zone 
X = Standard 2.5 Inch Dead Zone 
E = Environmental MS Connector, Designation T is no longer available 
E = External Interrogation 
002 - Number of Recirculations
952VP-2110-16 Brake Parts Ametek Gemco LDT. BlueOx Variable Pulse LDT for a 2110 Shut Height Monitor. 16 Inch Stroke Length 1/7
952VP-21104 Brake Parts Ametek Gemco Linear Distance Transducer LDT. Blue Ox Variable Pulse with a 4 Inch Stroke
952VP0300//0001 Brake Parts Ametek Gemco LDT, Blue OX, 30 Inch Stroke, Internal Interrogation, Environmental Connector, 6 Recirculations (6LBS) Sr # 18126-AO
953A-C4-0070-X-X-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT) High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0070 = 7 Inch Active Stroke 
X = Standard 2 Inch Null Zone 
X = Standard Dead Band of 2.5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0118-X-X-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT) High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0118 = 11.8 Inches Active Stroke 
X = Standard 2 Inch Null Zone 
X = Standard Dead Band of 2.5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0130-X-X-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT) High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0130 = 13 Inches of Active Stroke 
X = Standard 2 Inch Null Zone 
X = Standard Dead Band of 2.5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0300-X-D2.5-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT)  
Model AME-953A-C4-0300-X-D2.5-S-X 
High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0300 = 30 Inches of Active Stroke 
X = Standard 2 Inch Null Zone 
D2.5 = Dead Band of 5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0460-X-D2.5X-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT)  
Model 953A-C4-0460-X-D2.5-S-X 
High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0460 = 46 Inches of Active Stroke 
X = Standard 2 Inch Null Zone 
D2.5 = Dead Band of 5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0600-X-D2.5-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT)  
Model 953A-C4-0600-X-D2.5-S-X 
High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0600 = 60 Inches of Active Stroke 
X = Standard 2 Inch Null Zone 
D2.5 = Dead Band of 5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-C4-0700-X-X-S-X Brake Parts Ametek Gemco Linear Distance Transducer. (LDT) High Resolution (Analog) The 953A is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
C4= 4 to 20mA Output 
0700 = 70 Inch Active Stroke 
X = Standard 2 Inch Null Zone 
X = Standard Dead Band of 2.5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
953A-V0-0060-X-X-M-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-V0-0060-X-X-M-X 
V0 = 0 to 10 VDC Output 
0060 = Stroke 6 Inch Length 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
M = 6 Pin DIN-MTS-D60 compatible option 
X = No options
953A-V0-0119-X-D5-C12 Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-V0-0119-X-D5-C12 
V0 = 0 to 10 VDC Output 
0119 = Stroke 11.9 Inch Length 300 mm 
X = Standard 2.0 Inch Null Zone 
D5= Standard Dead Band 2.5 Inch 
C12 = Integral Cable / Potted Pigtail by 12 Foot Long
953A-V0-0180-X-X-C30-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-V0-0180-X-X-C30-X 
V0 = 0 to 10 VDC Output 
0180 = Stroke 18 Inch Length 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
C = Integral Cable Assembly by 30 Feet Long 
X = No options
953A-V0-0240-X-X-S-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-V0-0240-X-X-S-X 
V0 = 0 to 10 VDC Output 
0240 = Stroke 24 Inch Length 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
S = 5 Pin Micro, 12 mm Euro Connector 
X = No options
953A-V0-0500-X-X-S-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-VO-0500-X-X-M-X 
VO = 0 to 10 VDC Output 
0500 = Stroke 6 Inch Length 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
S = 5 Pin Micro, 12 MM Euro 
X = No options
953A-V0-300M-X-D5-C12 Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX Metric Stroke and Threads M18 x 1.5 metric threads  
Model 953A-V0-300M-X-D5-C12 
V0 = 0 to 10 VDC Output 
0300M = 300 mm Stroke Length 
X = Standard 2.0 Inch Null Zone 
D5 = Dead Band5 Inches 
C12 = Integral Cable / Potted Pigtail by 12 Foot Long
953A-VO-0900-X-C10-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-VO-0900-X-X-C10-X 
VO = 0 to 10 VDC Output 
0900 = Stroke 90 Inch Length 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
C10 = Integral Cable Assembly by 10 Feet Long 
X = No other options
953A-VO-2400-X-X-S-X Brake Parts Ametek Gemco Linear Displacement Transducer. Series 953 VMAX  
Model 953A-VO-2400-X-X-S-X 
VO = 0 to 10 VDC Output 
2400 = 240 Inch = 20 Foot Stroke / 20 Foot Active Travel 
X = Standard 2.0 Inch Null Zone 
X = Standard Dead Band 2.5 Inch 
S = 5 Pin Micro, 12 mm Euro Connector 
X = No options
953D-RS-0240.X-X-S-X Brake Parts Ametek Gemco Linear Distance Transducer model 953D-RS-0240.X-X-S-X. (LDT) High Resolution (Digital) The 953D is an accurate programmable, non-contact Linear Displacement Transducer in a Rod Style package.Absolute position accurate to 0.01% of the programmable sensing distance. Auto tuning capability with diagnostic LED's 
RS = RS-422 Start/Stop Pulse 
0240 = 24 Inch Active Stroke 
X = Standard 2 Inch Null Zone 
X = Standard Dead Band of 2.5 Inches 
S = 5 Pin Micro, 12 mm Euro, Connector 
X= No other options
9551409 Brake Parts Ametek Gemco Programming Unit. In Line Active Zone Programming Unit
955A-C4-0120-X Brake Parts Ametek Gemco LDT. Series 955A BRIK Gen III is an accurate programmable, auto-tuning, non-contact, Linear Displacement Transducer 
C4 = 4 to 20 Ma 
0120 = 12 Inch Stroke 
X = No options 
Null Zone: 3 Inches 
Dead Zone: 2 Inches 
Repeatability: + or - 0/006 % of Full Stroke 
Connector: 5 Pin Micro 12mm Euro 
IP67 Enclosure 
CE Approval
955A-C4-0200-X Brake Parts Ametek Gemco LDT. Series 955A BRIK Gen III is an accurate programmable, auto-tuning, non-contact, Linear Displacement Transducer 
C4 = 4 to 20 Ma 
0200 = 20 Inch Stroke 
X = No options 
Null Zone: 3 Inches 
Dead Zone: 2 Inches 
Repeatability: + or - 0/006 % of Full Stroke 
Connector: 5 Pin Micro 12mm Euro 
IP67 Enclosure 
CE Approval
955A-C4-0240-X Brake Parts Ametek Gemco LDT. Series 955A BRIK Gen III is an accurate programmable, auto-tuning, non-contact, Linear Displacement Transducer 
C4 = 4 to 20 Ma 
0240 = 24 Inch Stroke 
X = No options 
Null Zone: 3 Inches 
Dead Zone: 2 Inches 
Repeatability: + or - 0/006 % of Full Stroke 
Connector: 5 Pin Micro 12mm Euro 
IP67 Enclosure 
CE Approval
955A-C4-0300-X Brake Parts Ametek Gemco LDT. Series 955A BRIK Gen III is an accurate programmable, auto-tuning, non-contact, Linear Displacement Transducer 
C4 = 4 to 20 Ma 
0300 = 30 Inch Stroke 
X = No options 
Null Zone: 3 Inches 
Dead Zone: 2 Inches 
Repeatability: + or - 0/006 % of Full Stroke 
Connector: 5 Pin Micro 12mm Euro 
IP67 Enclosure 
CE Approval 
(6LBS)
955A-V0-018-X Brake Parts Ametek Gemco Linear Displacement Transducer  
955A BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
V0 = 0 to 10 Volt DC Output 
0180 = 18 Inch Active Travel 
X = No other options
955A-V0-0957-E Brake Parts Ametek Gemco Linear Displacement Transducer  
955A BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
V0 = 0 to 10 Volt DC Output 
0957 = 95.7 Inch Active Travel 
E = IP68 Rated Connector for High Humidity Environments
955A-V0-0958-E Brake Parts Ametek Gemco Linear Displacement Transducer  
955A BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
V0 = 0 to 10 Volt DC Output 
0958 = 95.8 Inch Active Travel 
E = IP68 Rated Connector for High Humidity Environments
955ARM18 Brake Parts Ametek Gemco Control Arm by 18 Inches Long. For use with 955A & S, 955DQ & D, 955LC LDT's Female & Male Threaded Ends 1/4-28. Other lengths available @ 3,6,9,12,15,18,22,28" or a custom length
955ARM6 Brake Parts Ametek Gemco Control Arm by 6 Inches Long. For use with 955A & S, 955DQ & D, 955LC LDT's Female & Male Threaded Ends 1/4-28. Other lengths available @ 3,6,9,12,15,18,22,28" or a custom lengths
955D-RS-1060-X Brake Parts Ametek Gemco Linear Displacement Transducer model 955D-RS-1600-X 
"BRIK Gen III" 
Digital Output., RS 422 START/STOP with interrogation Start Sequence 
1060 = 160 Inch Stroke 
955DQ-0060-E-1000-E-F7-X1-N Brake Parts Ametek Gemco Linear Distance Transducer model 955DQ-0060-E-1000-E-F7-X1-N-D-X 
955DQ = BRIK Generation III with direct Quadrature Output. 
Auto-Tuning Low Profile Package with LED Diagnostics 
0060 = 6 Inch Stroke/ Active Travel 
E = Euro 12 Pin, 12mm Connector 
1000 = 1000 Cycles per Inch Output Resolution. Maximum internal resolution is .001 Inches. Available range is 0001 to 9999  
E = Sinking Type, typically used with sourcing output type  
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 Quadrature Output Mode 
N = Nonvolatile Zero Offset Storage. Retentive 100,000 storage cycles maximum 
D = Differential RS422 Line Driver 
X = No Environment options
955LC-C4-0360 Brake Parts Ametek Gemco Linear Displacement Transducer 
Model 955LC-C4-0360 
Series 955LC Smart BRIK Analog LDT 
C4 = 4 to 20mA Output 
36 Inch Stroke Length / Active Travel 
Absolute position, repeatable to 0.01% of the sensing distance 
Quick Disconnect Connector
955LC-VO-0200 Brake Parts Ametek Gemco Linear Displacement Transducer 
Model 955LC-VO-0200 
Series 955LC Smart BRIK Analog LDT 
VO = 0 to 10 Volt DC Output 
0200 = 20 Inch Stroke Length / Active Travel 
Absolute position, repeatable to 0.01% of the sensing distance 
Quick Disconnect Connector
955LC-VO-0360 Brake Parts Ametek Gemco Linear Displacement Transducer 
Model 955LC-VO-0360 
Series 955LC Smart BRIK Analog LDT 
VO = 0 to 10 Volt DC Output 
36 Inch Stroke Length / Active Travel 
Absolute position, repeatable to 0.01% of the sensing distance 
Quick Disconnect Connector
955S-C4-0070 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0070 = 7 Inch Active Travel
955S-C4-0100 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0100 = 10 Inch Active Travel
955S-C4-0130 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0130 = 13 Inch Active Travel
955S-C4-0180 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0180 = 18 Inch Active Travel
955S-C4-0500 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0500 = 50 Inch Active Travel
955S-C4-0510 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
C4 = 4 to 20 mA Output 
0510 = 51 Inch Active Travel
955S-V0-0540 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
VO = 0 to 10 Volt DC Output 
0540 = 54 Inch Active Travel 
955S-V0-0650 Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
VO = 0 to 10 Volt DC Output 
0650 = 65 Inch Active Travel 
955S-V0-0820-E Brake Parts Ametek Gemco Linear Displacement Transducer  
955S Smart BRIK accurate programmable, non-contact, linear displacement transducer in a economical low profile package. Features auto-tuning capability, an analog output programmable over the entire active stroke length & diagnostic LED's for sensing a good magnet signal 
V0 = 0 to 10 Volt DC Output 
0820 = 82 Inch Active Travel 
E = IP68 Rated Connector for High Humidity Environments
956A-C4-0090-E Brake Parts Ametek Gemco Linear Displacement Transducer  
Model 956A-C4-0090-E 
956A = BLOK LDT Analog Version 
C4 = 4 to 20mA Output 
0090 = 9 Inch Active Stroke 
E = Wet Environment. Electronics sealed to a IP 68 Rating 
Input Voltage 13.5 to 30 VDC 
Null Zone 3 Inch 
Dead Zone 2 Inch  
3 Diagnostic LED's 
Standard 5 Pin Micro 12mm Euro Connector 
CE Approval  
IP68 Enclosure 
-20 to 70 Degree C
956A-C4-0130-X Brake Parts Ametek Gemco Linear Displacement Transducer  
Model 956A-C4-0130-X 
956A = BLOK LDT Analog Version 
C4 = 4 to 20mA Output 
0130 = 13 Inch Active Stroke 
X = No other options 
Input Voltage 13.5 to 30 VDC 
Null Zone 3 Inch 
Dead Zone 2 Inch  
3 Diagnostic LED's 
Standard 5 Pin Micro 12mm Euro Connector 
CE Approval  
IP67 Enclosure 
-20 to 70 Degree C
956DQ0120E1000EF7X1NDF Brake Parts Ametek Gemco LDT 
956DG BLOK Digital Quadrature Output with resolutions up to 9,999 Cycles per Inch 
956DQ-0120-E-1000-E-F7-X1-N-D-F 
0120 = 12 Inch Stroke Length 
E = Euro 12 Pin, 12 mm Connector 
1000 = 1000 Cycles per Inch Output Resolution 
E = Sinking Input, typically used with sourcing output type 
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 quadrature, 1ms update, output mode 
N = Non-volatile Aero Output Storage, Retentive 100,000 storage cycles maximum 
D = Differential RD422 line driver, TTL compatible 
F = Front Metal Rod End, Female
956DQ0120E1000EF7X1NDX Brake Parts Ametek Gemco LDT 
956DG BLOK Digital Quadrature Output with resolutions up to 9,999 Cycles per Inch 
956DQ-0120-E-1000-E-F7-X1-N-D-X 
0120 = 12 Inch Stroke Length 
E = Euro 12 Pin, 12 mm Connector 
1000 = 1000 Cycles per Inch Output Resolution 
E = Sinking Input, typically used with sourcing output type 
F7 = 250 KHz Quadrature Cycle Output Frequency Range 
X1 = X1 quadrature, 1ms update, output mode 
N = Non-volatile Aero Output Storage, Retentive 100,000 storage cycles maximum 
D = Differential RD422 line driver, TTL compatible 
X = No Options
956S-VO-0110-E Brake Parts Ametek Gemco Linear Distance Transducer 
956S Series, Smart BLOK Analog 
VO = 0 to 10 VDC Output 
0110 = 11 Inch Stroke Length 
E = Electronics Sealed to an IP 68 Rating for Wet Environments
A/H-ARC 18" X 4 Brake Parts Ametek Gemco Type A/H-ARC Brake System. Includes 4, 18 X 8 Inch Hydraulic Brakes, Hydraulic Actuators, Fluid Reservoir Bleeder, Pre-Assembled Air / Hydraulic Control Panel, 3/4 HP Motor & Compressor, Tubing, Armored Hoses, Fittings and Heavy Duty Brake Fluid. Rated dynamic stopping torque, progressive to 3600 LBS./FT. Specify 230 VDC or 230 / 460 VAC 60 Hz., 3 ph power. Net weight 948 LBS. Prices do not include brake wheels.
A/H-ARC 2-18 Brake Parts Ametek Gemco Type A/H-ARC Brake System. Includes 2, 18 X 8 Inch Hydraulic Brakes, Hydraulic Actuators, Fluid Reservoir Bleeder, Pre-Assembled Air / Hydraulic Control Panel, 3/4 HP Motor & Compressor, Tubing, Armored Hoses, Fittings and Heavy Duty Brake Fluid. Rated dynamic stopping torque, progressive to 3600 LBS./FT. Specify 230 VDC or 230 / 460 VAC 60 Hz., 3 ph power. Net weight 948 LBS. Prices do not include brake wheels.
A/H-ARC1-14 Brake Parts Ametek Gemco Air over Hydraulic, Air Treadle Remote Control Brake System. Qty. 1, 14 Inch Diameter Hydraulic Brake
A/H-ERC Brake Parts Ametek Gemco Type A/H-ERC Conversion System for Type H Systems (no parking feature). Includes one 3/4 HP motor driven compressor assembly, one prepiped and prewired control panel, one two way hydraulic check valve, one installation kit including tubing, fittings and fluid. 230VDC or 460VAC 3PH 60Hz.
A/H-ERC 18" X 4 Brake Parts Ametek Gemco Type A/H-ERC Brake System, Electric Remote Controlled. Provides Service Braking, Off Power Emergency Braking plus Parking Brakes. Air over hydraulic brake system includes 4, 18 Inch Brake Assemblies, Fluid Reservoir Bleeder, Foot Treadle Valve, Preassembled Air-Over-Hydraulic Control Panel, 3/4 Horsepower Motor & Compressor, Parking Control Switch, Hyd Tubing, Armored Hoses, Fittings & Brake Fluid. 230 VDC or 230 / 460 VAC 60 Hz. Motor controls are in a NEMA 12 enclosure which is mounted on the panel. Panel size 33 Wide X 45 High X 16 Inches Deep. Brake Wheels are not included
A/H-ERC 18" X 4 W/PRK Brake Parts Ametek Gemco Type A/H-ERC Brake System, Electric Remote Controlled with 4 Brake Parking. Provides Service Braking, Off Power Emergency Braking plus Parking Brakes. Air over hydraulic brake system includes 4, 18 Inch Brake Assemblies, Fluid Reservoir Bleeder, Foot Treadle Valve, Preassembled Air-Over-Hydraulic Control Panel, 3/4 Horsepower Motor & Compressor, Parking Control Switch, Hyd Tubing, Armored Hoses, Fittings & Brake Fluid. 230 VDC or 230 / 460 VAC 60 Hz. Motor controls are in a NEMA 12 enclosure which is mounted on the panel. Panel size 33 Wide X 45 High X 16 Inches Deep. Brake Wheels are not included
A/H-ERC10-1 Brake Parts Ametek Gemco Hydraulic Brake System. Air Over Hydraulic Electric Remote Controlled Single 10 Inch Brake System
A/H-ERC141 Brake Parts Ametek Gemco A/H-ERC System with 1 14 Inch Hydraulic Brake Assembly
Updated on February 26, 2016 1:27 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com