Spec Tech Industrial
Back to Gleason

Buy Your Industrial Control Products Here!

Gleason Reel

Hose Reel Product Line

The following products represent the entire Gleason Hose Reel product line. Product literature for the various hose reels (in PDF format) can be downloaded by clicking the link below the desired product description.

 

Gleason Hose Reel Product Line Brochure

Hose Reel Product LIne

Download a brochure that highlights all of the hose reels contained on this page:

• Gleason Series GH Industrial Duty Hose Reels
• Gleason Series MH Industrial Duty Hose Reels
• Gleason Series HH Industrial Duty Hose Reels
• Gleason Series H Heavy Duty Hose Reels
• Gleason EZ-Pull Heavy Duty Hose Reels
• Gleason Series UH Extra Heavy Duty Hose Reels
• Gleason Series K Extra Heavy Duty Dual Hydraulic Hose Reels

Download Gleason Hose Reel Product Line Brochure
 

Gleason Series GH Industrial Duty Hose Reels

Series GH Industrial Duty Hose Reels

General Purpose Single Hose Reel.

Features:
• Six frame sizes and six spool widths
• 1/4”, 3/8”, 1/2” and 3/4" (6, 9, 13, 19 mm) low, medium or high pressure hose
• High quality swivel joints designed with seals for each specific fluid application
• Rugged steel construction
• Full flow shaft and swivel
• Hand pull, fully automatic rewind
• Mount from ceiling, wall or under bench
• Spring motors are safety banded and lubricated for long, trouble free performance
• Positive ratchet lock
• Multi-position four roller hose guide
• Adjustable hose stop
• Orange polyester baked on finish

Download Series GH Industrial Duty Hose Reel Information
 

Gleason Series MH Industrial Duty Hose Reels

Series MH Industrial Duty Hose Reels

Hose Reels for commercial / industrial applications. For mobile outdoor environment use.

Features:
• Two frame sizes and three spool widths
• 1/4”, 3/8”, 1/2”, 1" or 1-1/2" (6, 9, 13, 25, 38 mm) hose
• Air, water, oil, grease or oxy/acetylene duty
• High quality swivel joints designed with seals for each specific fluid application
• Rugged steel construction
• Hand pull, fully automatic rewind
• Heavy duty mounting brackets
• Spring motors are safety banded, totally enclosed and lubricated for long, trouble free performance
• Positive ratchet lock
• Multi-position adjustable full width hose guides to prevent hose from "stacking"
• Adjustable hose stop
• Orange polyester baked on finish

Download Series MH Industrial Duty Hose Reel Information
 

Gleason Series HH Industrial Duty Hose Reels

Series HH Industrial Duty Hose Reels

General Purpose Single Hose Reel. Manual pull-off, handcrank rewind.

Features:
• Four frame sizes and four spool widths
• 1/2”, 3/4" and 1" (13, 19 and 25 mm) hose fittings - Hose must be ordered separately
• Air, water, oil, or grease duty
• High quality swivel joints designed with seals for each specific fluid application
• Rugged steel construction
• Manual pull-off, handcrank rewind
• Heavy duty mounting brackets
• Spool locking pin acts as a holding brake to prevent spool from unwinding when not in use
• Locking pin also acts as an adjustable drag brake to control spool rotational speed during manual hose pull-off
• Orange polyester baked on finish

Download Series HH Industrial Duty Hose Reel Information
 

Gleason Series H & EZ Pull Heavy Duty Hose Reels

Series H & EZ Heavy Duty Hose Reels

Heavy duty hose reels for machine pull or EZ-Pull for gentle hand pull.

Series "H" Application:
• Connect machines to air/water supply
• Hand pull, with or without ratchet stop
• Ideal for fluids, compressed air.
• Mount base up, down or to wall for vertical or horizontal hose travel.
• Add optioinal 340 degree pivot base. Hose reel turns to follow hose payout.

EZ-Pull application
• Mount under workbench or low on wall
• Supply air to tools, compressed air for inflating or cleaning
• Increase safety...hose does not "fly back" to hose reel

Download Series H and EZ Pull Heavy Duty Hose Reels Information
 

Gleason Series UH Extra Heavy Duty Hose Reels

Series UH Extra Heavy Duty Hose Reels

General Purpose Single Hose Reel.

Features:
• Five frame sizes and five spool widths
• 3/4”, 1”, 1-1/4” and 1-1/2" (19, 25, 32, and 38 mm) hose fittings. Hose must be ordered separately.
• High quality swivel joints designed with seals for each specific fluid application
• 300 PSI standard rating (ratings to 10,000 PSI available)
• Wide or Narrow spool
• Direct or Chain Drive
• Rugged U-shaped frame
• Safetychange spring motor
• Optional 340 degree pivot base
• Optional roller guide accommodates a variety of mounting configurations.
• Positive ratchet lock

Download Series UH Extra Heavy Duty Hose Reel Information (136 kb, 2 pages)
 

Gleason Series K Extra Heavy Duty Dual Hydraulic Hose Reels

Series K Extra Heavy Duty Dual Hydraulic Hose Reels

Dual Hydraulic Hose Reel.

Features:
• Five frame sizes and four spool widths
• 1/4”, 3/8”, 1/2” and 3/4" (6, 9, 13, 19 mm) hose fittings - Hose must be ordered separately
• 3000 PSI standard swivel joint rating
• Dual port swivel joint with replaceable seals
• Hose connections readily accessible
• Welded, all steel frame for maximum strength
• Safetychange Spring Motor
• Optional Ratchet Lock
• Pre-lubricated, sealed ball bearings

Download Series K Extra Heavy Duty Dual Hydraulic Hose Reel Information (127 kb, 2 pages)
 

Engineered Product Group Gleason Reel Hose Reels

Gleason Series "U" Hose Reels

Series U Hose Reels The Gleason Series U Hose Reel provides ultimate flexibility...larger diameter and/or wider spools, single or dual spring motors, chain drive where needed. In addition, the modular U-Reel design allows us to provide a custom hose reel for your application at the cost of an off-the-shelf unit. The rugged Series U Hose Reel, featuring a heavy frame with spool supported on dual over-sized bearings, can easily handle air, water or hydraulic hoses up to 1.5"I.D. The Series U Hose Reel is rated at 300 psi per standard hose and hose fittings but high pressure applications to 10,000 psi are possible with proper hardware.
Download Series U Hose Reel Catalog .PDF
Download Series U Hose Reel Selection Chart .PDF
 

Gleason Series "K" Hose Reels

Series K Hose Reels Gleason Series K Hose Reels are ideal for hydraulic hose control on boom cranes, hoists, tree cutters, lifts or any moving hydraulic equipment. They can also be used for other liquids or air. Whether machines push-pull, extend-retract, turn, tip, clamp hold or dump, Gleason series K all-steel spring driven dual hose reels speed operation and improve handling and safety. Series K Hose Reels handle up to 80 ft. of 1/4" I.D. dual hose with 3000 psi full-flow pressure throughout the reel. Maximum 3/4" I.D. hose.
Download Series K Hose Reel Catalog .PDF
 

Gleason Series "Hose Master" Hose Reels

Hose Master Hose Reels The Gleason Hose-Master hose reel is the most rugged single hose, general purpose hose reel of its size in the industry. We created it with the most demanding hose reeling applications in mind, hand pull or machine mounted. Oversized bearings and a heavy duty, one piece main shaft (also available in stainless steel) give Hose-Master hose reels superior mechanical strength. Roller Guide is standard. The reliable ratchet and dog allows quick and easy changeover from window shade-type action to continuous tension. Handles up to 70 ft. of 3/8" I.D. hose. Maximum hose diameter is 1/2" I.D. Reel is rated at 300 psi per standard hose and hose fittings. The Hose Master hose reel is capable of higher pressures with proper hardware.
Download Hose Master Hose Reel Catalog .PDF
Download Hose Master Hose Reel Selection Guide .PDF
 

Gleason Series "J" Hose Reels

Series J Hose Reels The Series J Hose Reel is typically applied to the most demanding industrial application. May be used for air or liquid. Easily handles hose up to 2" (51mm) O.D. Normally machine mounted, it may also be used in hand pull applications. Constructed of heavy gauge steel with industrial grade fittings, Series J Hose Reels are rated at 300 psi (20.7 bar) per standard hose and hose fittings. Hose Reels designed for pressures up to 2000 psi (137.9 bar) are also available.
Download Series J Hose reel catalog .PDF
 

Gleason Series "H" Dual Oxy/Acetylene Hose Reels

Series H Hose Reels Rugged, dependable and trouble free, these hose reels are designed for general shop use. They can be mounted wherever most convenient; on carts, walls, poles, or ceilings. A slight tug on the hoses releases the ratchet and the hoses are automatically retrieved onto the Series H hose reel where they are out of the way, off the floor, and safe from accidental damage. Hose Reels models available for 60' or 100' long hoses.
 

Gleason Series "R-35" Hose Reels

Series R-35 Hose Reels Spring Operated Dual Hose Reels for Hydraulic Pressures up to 2000 PSI. New seal design and kink-free hose entrance. Available in models with nine or 17 foot hose capacities for left or right hand installation. Extra rugged and compact for hydraulic lift truck service. These hose reels are made of all steel construction.
Download "R-35" Hose Reel Catalog .PDF
 

Gleason R-45 Hose Reels
Series R-45 Hose Reels Spring-Operated Quad Hose Reels for Hydraulic Lift Trucks. Gleason's unique four port design improves operator visibility, increases hose reel efficiency and provides substantial cost savings. The R45 Series spring operated quad hose reels provide design simplicity and compactness, installation and replacement ease, and dependable, long service life. These rugged hose reels are available with capacities to 17 feet of #4 hose and for pressures up to 2000 PSI.
Download R-45 Hose Reel Catalog .PDF
 

Gleason Hand And Power Driven Hose Reels

Hand and Power Driven Hose Reels Hose Reels available in rim rewind, direct or geared crank rewind or with air or electric motor drives. This broad line of hose reels solves a range of applications.
Download Hand And Power Driven Hose Reels bulletin .PDF
Updated on February 26, 2016 2:29 PM
203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com