Spec Tech Industrial
Back to Hubbell

Buy Your Industrial Control Products Here!

Hubbell Industrial Control Products


AC Magnetic Motor Controls

AC controllers for use with new or existing wound rotor or squirrel cage motor drives featuring contactor type secondary control or solid state four quadrant speed regulation.  They are ideal for motor primary or secondary controls, eddy current brake hoist, counter torque hoists and life bridge controllers.  Also available are adjustable frequency drives.  Hubbell AC Motor controllers are designed to meet your specifications and constructed to fit you space.

4010 Reversing/Plugging Travel Control
4011 Dynamic Lowering
4012 Mechanical Load Brake
4013 Counter Torque
4014 Electric Load Brake
4015 Rectified DC Dynamic Lowering Hoist Controller
4016 Crane Protective Panel
4017 AC Hoist Controller with Compensated DC Dynamic Lowering


AC/DC Contactors and Relays

  • Rugged Euclid™ contactors feature many unique design and engineering advancements that greatly simplify applications, installations and servicing...  Over 65 years of experience in design as well as manufacturing has been incorporated into these highly reliable units

  • DC RELAYS, Type 5320, general purpose control, voltage sensitive, current, and plugging relays are built to withstand severe service using the latest technology in materials for insulating and high-strength.  They are recommended for use on heavy industry dc drives such as cranes and mill auxiliaries.

5110 AC Magnetic Contractors
5210 DC Magnetic Contractors
5320 Euclid DC Relay


AC/DC Solid State Motor Controls

Hubbell's S²MC Solid State Stepless Motor Controls are ideal for controlling overhauling loads such as lift bridges, bridge cranes, bucket/grapple cranes, portal/whirly cranes, turbine cranes, tramways, and coke oven drives.

Utilizing AC induction motors (squirrel cage and wound rotor) the line of S²MC controllers are available in both primary thyristor (4920 series) and secondary thyristor (4940 series) through 500 hp, or more, and capable of operating on 208/230/380/460/575, 3 phase VAC, 50/60 Hz.  The line of S²MC controls have been successfully applied on hundreds of applications for over 15 years.

4920/40 AC Static Crane Control


DC Magnetic Motor Controls

The most complete line of standard and custom controllers.  All controllers are front wired, from connected and front accessible in NEMA rated contactor sizes 0 through 8 for EOT crane control, dynamic lowering and reverse-plugging installations.  Also available are mill auxiliary controllers, special circuits to meet custom installation requirements and special construction to meet customer specifications.

4110/4120 Travel Controllers
4111/4121 Hoist Controllers


Disconnect Switch

Type 4245

The Manual-Magnetic Disconnect Switches are combinations manually and magnetically operated contactors enclosed in a NEMA Type wall-mounted enclosure

The contactors for the disconnect switches are the same as the contactors used on Euclid's crane and mill type magnetic controllers.  Silver faced contacts are standard.

Type 5410

Fused Disconnect - Rated 30amp-200amp. UL Listed.

Euclid™ Manual-Magnetic Disconnect Switch - Type 4245
Fused And Non-Fused Disconnect Switch - Type 5140
Lifting Magnet Disconnect Switch - Type 4310


Electronic Components

The Bulletin 5330 Electronic Frequency Relay (EFR) master/slave system is designed to be used with wound rotor motor controls.  The master unit is a complete frequency relay providing one point of frequency detection. The master relay can be used as a stand-alone relay. The slave unit must be used with the master unit and provides additional points of frequency detection.

The Bulletin 5350 Static In-Line Timer is a solid state timing unit for use in AC or DC contactor and relay control. The timing unit is a series control element having an adjustable timing range. Two units are available. One with a timing range of 0.5 to 3.0 seconds, another with a timing range of 2.5 to 16.0 seconds.

The Bulletin 5360, Hubbell Arc Suppressor, is designed to reduce contact arcing in DC control circuits where the inductive coil loads of contactors and relays are interrupted.  Utilization of the Bulletin 5360 Arc Suppressor may eliminate the use of an interposing relay.

The Bulletin 5370 Electronic Overload Relay receives line current signals from an ammeter shunt and performs both the Inverse Time as well as the instantaneous Trip functions normally performed by two (2) separate electro-mechanical overload relays.

5330 Electronic Frequency Relay
5350 Static In-Line Timer
5360 Arc Suppressor
5370 Electronic Overload Relay

Limit Switch

Type 4220

D-C Limit Switches are devices that are used to interrupt the main power circuit, setting up a dynamic braking circuit that quickly stops hook travel with a minimum of drift.

 

A-C Limit Switches are similar in construction to D-C Limit Switches.  The difference is in operation.  A-C Limit Switches disconnect two power lines to the hoist motor which then is stopped by a magnetic brake.

Type 4225

Euclid quick break limit switches for hoists are normally closed by the weight of the striking lever.  The movement of the lever on its upward travel, when engaged by the hoist hook block on its upward travel, causes the switch to quickly break the circuit to the motor with very little upward movement of the crane hook.  The switch is automatically reset by the weight of the striking lever when the hook is lowered.

Euclid™ Power Limit Switch - Type 4220
Quick Break Power Limit Switch - Type 4225
Furnas Brand Series 54 Limit Switch and Gleason Series 55 Limit Switch

Magnet Controls

Hubbell Euclid™ Magnet Controllers utilize heavy duty components and circuitry arranged to provide optimum control of your lifting magnet.  Full featured NEMA Type 1 or 3R enclosed magnet controllers are available for immediate shipment.  Of course, we welcome inquiries for custom applications as well.

4212/4215 "Lift Drop" Master Switch
4291 Euclid Lifting Magnet Controller
4292 "Yard Master" Lifting Magnet
4295 Automatic Discharge
4296 Manual Discharge
4310 Lifting Magnet Disconnect Switch

Master Switch/Drum Controller

Type 4211 Mini-Master

The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing.  It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications.

Type 4216 Mill Master

These master switches are of rugged construction to withstand the rough service encountered on applications in the steel mills, such as crane, coal, and ore bridges, blooming and rolling mill auxiliaries, etc., where either floor or desk mounting is required

Type 4253

Furnas Brand Master Switches are used to provide single handle pilot control of hoists, cranes, oven pushers, car movers and other equipment requiring speed steps of wound rotor or direct current motors.

Type 4258

Furnas Brand Drum Controllers start, stop and change the speed and/or rotating direction of reversible AC and DC electric motors.

 

4211 Mini-Master Switch
4216 Cam Operated Master Switch
4253 Furnas Brand Class 53 Master Switch
4258 Furnas Brand Class 58 Drum Controllers

Movable Bridge Controllers & Accessories

For over 50 years Hubbell Industrial Controls, Inc. has manufactured a wide variety of standard and custom engineered AC/DC motor controllers and motor control accessories for all types and styles of movable bridges. Beginning with simple manually operated drum controllers back in the early part of the 1900's, we have expanded our line of controls to include the very latest in solid state controls and control accessories

Movable Bridge Controller and Accessories

Neutral Grounding Resistors

Neutral Grounding Resistor

Hubbell Neutral Grounding Resistors limit the maximum fault current to a value which will not damage equipment, yet allow sufficient fault current for protective relays to clear the fault, conforming to IEEE Standard 32-1972

3024 Neutral Grounding Resistor

Pendant Pushbutton Station

HD and WP stations of heavy duty steel or aluminum may be pendant or surface mounted. They are shipped fully assembled and ready for customer connections.

PBC, WPBC, and XPBC are cam operated stations assembled in a variety of enclosure types. These stations are available with special circuit configuration and can be from one to five speeds, stepped or stepless operation. Many options are available for this type of station, including duplex construction with conduit boxes selector switches and many other special features.

CPB pendant stations are our most compact, ergonomic pendants. Available in single or two speed operation with NEMA 4X construction and CSA & UL Approval.

PBP pendant stations are weatherproof, heavy duty rubber stations with plug in pushbutton inserts, from one to five speeds. Components are readily available from our stock.

PBM pendant stations are lightweight and ergonomic and use 22mm operators. One through five speed buttons are available. Enclosures are NEMA 4X construction with CSA & UL Approval.

2001 HD
2015 Type PBC
2016 Type WPBC
2017 Type XPBC
2020 PBP
2030 CBP
2040 PBM


Power Resistors

Hubbell Type SSR Power resistors from 1.3 amps through 101 amps are available, from unassembled to completely assembled in frames with covers. Standard assemblies are pre-engineered for primary or secondary resistance, and are used in typical applications such as motor starting or dynamic braking. Construction elements are stainless steel around a porcelain insulator, manufactured for endurance and reliability.

Heavy duty Types K1 and HHC resistors also utilize continuous stainless steel elements, with no weld joints where hot spots could develop. These resistors are available in ranges from 38 amps to 695 amps.

3003 Type SSR
3004 Type K
3005 Type HHC


Speed Switch

Speed responsive switches detect motion, or sense over-speed or under-speed occurrences of industrial machinery or motors. Hubbell Industrial Controls, Inc. has both direct coupled or non-contact type switches for; directional, non-directional, plugging, anti-plugging, over-speed, under-speed, and also zero-speed applications. Many enclosure styles are available including surface or flange mounting with NEMA 3, 4, 7, 9, 10 or 13 construction.

2200 Type PR
2210 Type C
2220 Type F
2243 Type D
2260 Type E
2310 Type Non Contact


203 Vest Avenue
Valley Park, MO 63088
Toll Free: (888) SPECTECH
Phone: (636) 537-0202
Fax: (636) 537-1405
E:mail: sales@spectechind.com