Downloads
1970 Drive-Check Catalog |
The Series 1970 Drive-chek is a multi-purpose sub-base that is mounted under a chain or belt driven mechanism. The unit serves three purposes; namely, a broken chain or belt detector, a chain or belt tightener, and a shock and vibration isolator.
Overview
The DRIVE-CHEK is a multi-purpose sub base that is mounted under a chain or belt driven mechanism. The unit serves three purposes; namely, a broken chain or belt detector, a chain or belt tightener, and a shock and vibration isolator. A Gemco Indicator Switch is provided with each DRIVE-CHEK Unit to indicate when a drive belt or chain failure has occurred. Shock and vibration from the machine to the hinge plate of the DRIVE-CHEK Unit are dampened by coil springs on one end of the hinge plate and an elastomeric support on the other end. The springs also maintain a constant tension in the drive belt or chain. DRIVE-CHEK is of rugged welded construction and is painted to prevent corrosion. The drive chain or belt can be attached to the mechanism being driven from either above or below the DRIVE-CHEK base.
|
| |
|
Downloads
1980 Brochure
1980S Instruction Manual
DeviceNet Resolver Manual |
1980 Rotating Cam Limit Switch
The Series 1980 Micro-Adjust Rotating Cam Limit Switch is a pilot device used for heavy duty material handling mechanisms, mechanical presses, packaging machines, rotary tables, and in many other applications where repetitive and sequential operations are required in control circuitry. When motion is expressed in shaft rotation, either thru a roller chain, gear train, or directly, the Rotating Cam Limit Switch makes it possible to open or close independent circuits at any desired angular positions. The Series 1980 is available in NEMA 1, NEMA 4 & 5, NEMA 7, NEMA 9, and NEMA 12 enclosures. The units can be ordered with 2 to 40 circuits.
Specifications
Resolver
Resolution- 12 bit resolution (4096 counts)
RPM- 1024 max.
DeviceNet
Conformance- This product has been tested by ODVA’s authorized Independent Test Lab and found to comply with ODVA Conformance Test Software Version A-12.
Power Requirements- 92mA @ 11Vdc typical- 67mA @ 24Vdc typical.
InRush- 350mA @ 11Vdc for 20 ms- 450mA @ 25Vdc for 10 ms. \
Device Type- “Generic”
Communications- Group 2 slave only.
Messages supported- Polled, Bit Strobed, Explicit.
Baud Rates- 125K, 250K, 500K
Position Rate- 915μs
RPM- 29.29 ms
Scale Factor - 2 to 4096
Position Range - 0 to 1 less than scale factor.
Setpoints- Separate ON and OFF points for each setpoint.
Quantity - 8\
Range - 0 to 1 less than scale factor.
Approvals - CE
Environmental - Temperature
Operating- -20°C to +70°C
Storage- -40°C to +85°C |
| |
|
Downloads
1980R Brochure |
1980R Rotating Cam Limit Switch w/resolver
The Series 1980R combines a resolver based signal off of the existing camshaft. Many press operations are now being fitted with automation equipment that requires limit switch outputs. While most press control outputs remain unchanged from die to die, the automation outputs frequently require adjustment. The Series 1980R Cam/Resolver package provides the safety and reliability of mechanical cams for press control circuits. The industrial grade resolver supplies the input to a programmable limit switch that provides the automation other frequently changed outputs.
The Series 1980 is available in NEMA 1, NEMA 4 & 5, NEMA 7, NEMA 9, and NEMA 12 enclosures. The units can be ordered with 2 to 40 circuits.
|
| |
|
 Downloads
1983 Opto-Cam Brochure |
1983 Optical Limit Switch
The Series 1983 Opto-Cam is a rotating cam limit switch that uses a photo eye to optically actuate. Used primarily for applications requiring high speed positioning, up to 3600 RPM, where a mechanical switch would not be able to function.
The Series 1983 Opto-Cam has 2-40 circuit rotating cam limit switch assemblies with NEMA 4, 7, and 12 enclosures. It has AC and DC outputs with 3-amp plug-in opto 22 outputs. Also, a 3" micro-adjust cam for precision settings from 1° to 359°. |
| |
|
Downloads
1986A Cut Sheet |
1986A Standard Foot Mount Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986A
Shaft Loading Axial- 150 lbs. Max.
Shaft Loading Radial- 100 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE
|
| |
|
Downloads
1986B Flange Mount Resolver Cut Sheet |
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986B
Shaft Loading Axial- 45 lbs. Max.
Shaft Loading Radial- 45 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986C Cut Sheet |
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986C
Shaft Loading Axial- 45 lbs. Max.
Shaft Loading Radial- 45 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE
|
| |
|
Downloads
1986D Cut Sheet |
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986D
Shaft Loading Axial- 150 lbs. Max.
Shaft Loading Radial- 100 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE
|
| |
|
Downloads
1986DN Data Sheet
DeviceNet Resolver Manual |
1986DN - DeviceNet Resolver
Series 1986DN Resolver combines the reliability and resolution of resolver continuous rotary position sensing with the added flexibility of DeviceNet communications, all in a single device. The resolver technology is the same as used in other Gemco resolvers, proven in such rugged applications as on stamping press automation.
Specifications
Resolver
Resolution- 12 bit resolution (4096 counts)
RPM- 1024 max.
DeviceNet
Conformance- This product has been tested by ODVA’s authorized Independent Test Lab and found to comply with ODVA Conformance Test Software Version A-12.
Power Requirements- 92mA @ 11Vdc typical- 67mA @ 24Vdc typical.
InRush- 350mA @ 11Vdc for 20 ms- 450mA @ 25Vdc for 10 ms.
Device Type- “Generic”
Communications- Group 2 slave only.
Messages supported- Polled, Bit Strobed, Explicit.
Baud Rates- 125K, 250K, 500K
Position Rate- 915μs
RPM- 29.29 ms
Scale Factor - 2 to 4096
Position Range - 0 to 1 less than scale factor.
Setpoints- Separate ON and OFF points for each setpoint.
Quantity - 8
Range - 0 to 1 less than scale factor.
Approvals - CE
Temperature
Operating- -20°C to +70°C
Storage- -40°C to +85°C
|
| |
|
Downloads
1986E Cut Sheet |
1986E - 100mm Face Mount Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986E
Shaft Loading Axial- 125 lbs. Max.
Shaft Loading Radial- 75 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986F Cut Sheet |
1986F - Standard Block Style Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986F
Shaft Loading Axial- 200 lbs. Max.
Shaft Loading Radial- 400 lbs. Max.
Enclosure- Nema 13
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986G Cut Sheet |
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986G
Shaft Loading Axial- 200 lbs. Max.
Shaft Loading Radial- 400 lbs. Max.
Enclosure- Nema 13
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986GG Cut Sheet |
1986GG - Multi-Turn Dual Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986GG
Shaft Loading Axial- 200 lbs. Max.
Shaft Loading Radial- 400 lbs. Max.
Enclosure- Nema 13
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986H Cut Sheet |
1986H - Servo Mount Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986H
Shaft Loading Axial- 20 lbs. Max.
Shaft Loading Radial- 40 lbs. Max.
Enclosure- Nema 13
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE |
| |
|
Downloads
1986I Cut Sheet |
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Resolver Specification for 1986I
Shaft Loading Axial- 50 lbs. Max.
Shaft Loading Radial- 100 lbs. Max.
Enclosure- Nema 4
Temperature- -40 degrees C to 125 degrees C
Shock- 50 G's for 11mSec
Vibration- 5 to 2000Hz @ 20G's
RPM- 5000 Max
Agency Approval- CE
|
| |
|
Downloads
1986MD Cut Sheet |
1986MD - Mill Duty Housing
The Series 1986MD with Mill-Duty Housing is designed for harsh environments where a standard resolver would normally be destroyed. It has a ¼” (6.35 mm) plate steel construction and jackshaft input to drive resolvers, encoders, tach generators or any combination. Also, an air purge fitting for positive pressure or cooling. The Vortex cooler or internal heater helps protect the resolver from extreme temperatures.
The Series 1986 with Mill-Duty Housing comes in custom versions that include all 316 stainless steel construction shaft sizes to 1-3/4” diameter and dimensions sized to existing mounting envelope which is also available in metric sizes. |
| |
|
Downloads
1986XP Cut Sheet |
1986XP - Explosion Proof Resolver
Series 1986 Resolver Assembly packages are direct bolt-in replacements for most English and metric size encoders. Equipped with an internal precision gear reducer for multi-turn applications. The Series 1986 Resolver Assembly is compatible with most competitors' electronic modules. Numerous standard ratios are stocked with customs available within a reasonable lead-time. Gemco resolvers can be used with our Series 1746 Absolute Position PLC Interface and a Series 2120 PLC Interface Module.
Gemco has always been a pioneer in the design and build of custom resolver packages. We can mechanically and electrically match any competitor's package.
Overview
Certifications:
UL Listed E10493
CSA Certified LR27991
Compliance:
NEC Class I, Division I, Groups C & D, Class II, Groups E, F & G
UL Standard 886
CSA Standard C22.2 No. 30
All resolver wiring is taken to a terminal strip inside the housing and is accessible through a 1/2” - 14 NPT conduit opening.
|
| |
|
 Downloads
2000 Brochure |
The Series 2000 Rotary Limit Switch is primarily used for machine tools, handling devices, and rotary operators where motion is expressed in shaft rotation. The primary purpose of the switch is to control the intermediate or end limits of a linear or rotary motion. The switch is often used as a safety device to protect against accidental damage to equipment.
Available in several different versions: Worm Gear Type, Spur Gear Type, Heavy Duty Type, 2 Circuit Worm Gear Type, and the 4 Circuit Worm Gear Type.
|
| |
|
 Downloads
2000 Brochure |
2006 K Type Rotary Limit Switch
The Series 2006 K Type Rotary Limit Switch is designed to control the limits of travel of rotating reversing equipment. This switch can be used in applications requiring ratios from 5:1 to 1080:1 and is available in two and four circuits.
Some typical applications include: hoists, elevating jack mechanisms, packaging machinery, material handling equipment, conveyors, and door operators.
|
| |
|
